Table of Contents
Advertisement
Replace wind cups:
1. Loosen the screw on side of cups
2. Remove cups
3. Install new cups
4. Tighten screw
Note: The screw in the wind cups will fit on the flat side of the metal stem on the
sensor.
Check that the wind cups attach to the sensor. Occasionally they can come off.
Check that the cups seat properly by pushing on the center of the cups.
Check that the cups spin freely.
Check the unit of measure (MPH, KM/H or M/S).
Check to see if the Professional weather station receives the same repetitive
wind speed recording from the sensor multiple times.
Confirm the direction is working correctly.
Check that the cups turn freely.
Check for obstructions that prevent clear wind flow to the cups.
Check mounting. In most cases, the wind sensor needs to be 6 feet or more
above the highest point on the roof in order to clear nearby obstructions and
read accurately. A 50-foot clearance in all directions is best.
It is helpful to send pictures of the sensor mounting, if you need to contact
customer support.
Check that your batteries are fresh in the thermo-hygro sensor and the
Professional weather station.
Current Wind Speed:
The current wind speed which represents a 30 second average of wind speed samples
taken. This should correspond to the wind graph above.
Top Wind Speed:
Highest instantaneous wind speed recorded in the past 60 minutes.
Updates when a higher wind speed has occurred.
Last number will remain if there is no wind for 60 minutes.
Color Wind Speed Graph:
The wind speed graph with color sections is based on current wind speed.
One segment will flash indicating current wind speed.
Wind Speed History:
Press and release the HISTORY button to view the past top wind speeds with
time and date of occurrence. The 1-hour top speed is the default reading
shown on the display.
La Crosse Technology, Ltd.
WIND SPEED IS 0.00
WIND SPEED IS INACCURATE
UNDERSTANDING WIND READINGS
Page 6
- Quick Links:
- Battery Change
Hide quick links:
Advertisement
Table of Contents
