14). Optional: insert 3-AA batteries into the weather station. Thermo-hygro sensor Wind Speed sensor Weather Station TX141TH-BCHv3 TX144W 327-1417v2 Power Cable 1 2 3 °C/°F Optional Note: Batteries are not included Red LED on sensors: Both sensors have a red LED light that flashes once during Back sensor signal transmission.
Buttons • Buttons are located on the top of the weather station. • When entering a settings mode, hold the correct button (SET, ALERTS). • And press and release the correct SET or ALERT button again to move to the next item in that setting mode.
To begin: Hold the SET button 3 seconds, then release: 1. BEEP ON | OFF 2. ATOMIC ON | OFF 4. DST ON | OFF 3. Time Zone 6. Hour 8. Year 5. 12 | 24 Format 7. Minutes 11. Fahrenheit | Celsius 10.
Display Icons CH 1 AM | PM Forecast Icon Atomic Time Percent Humidity Daylight Saving Time HI | LO Alert Kilometers | Miles per hour Sensor Strength Channel Indicator Fahrenheit | Celsius CH 1 Trend Arrows Wind Speed Graph • Wind speed chart will fill to current speed. Current speed will blink.
Wind Readings Wind Speed: Highest speed in past 30 seconds Top Wind Speed: Highest recorded wind speed in time interval. Default is 1 hour, controlled by the Wind History feature, details below. Feels Like Temperature: Wind Speed | Temperature | Humidity combined •...
Reset Wind Speed History • Press the WIND button to view individual wind speed readings. • Hold the MINUS button for five seconds to reset each individual value. • Wind speed reading will reset to current wind speed. Temperature/Humidity HI | LO Readings Press and release the TEMP button to view HI/LO temperature and humidity readings with time/date stamp.
Reset Temperature/Humidity Readings • Press the TEMP button to view individual HI | LO readings. • Hold the MINUS button for five seconds to reset each individual value. • Individual readings will reset to current temperature, humidity, etc. Set Weather Alerts •...
• Outdoor LOW Humidity ON/OFF • Outdoor LOW Humidity Value 10%RH to 99%RH • Outdoor HIGH Humidity ON/OFF • Outdoor HIGH Humidity Value 10%RH to 99%RH • Indoor LOW Temperature ON/OFF • Indoor LOW Temperature Value 32°F to 99°F (0°C to 37°C) •...
Weather Forecast Icons • The forecast icons are determined by the station's barometric pressure reading. • When Outdoor temperature is below 32˚F and the forecast is RAIN or T-STORM, the station will display SNOW. SUNNY PARTLY CLOUDY CLOUDY RAIN T-STORM SNOW Forecast Trend Arrows Forecast trend arrows indicate the rise and fall of barometric pressure.
Change Batteries TX144W Sensor: 1. Grab the vented portion of the sensor and turn counter clockwise. 2. Remove old batteries and install fresh “C” batteries. 3. Carefully align and turn vented portion clockwise to tighten. 4. Hold the WIND button on the weather station for 3 seconds to search for the sensor. TX144W Sensor Wind cups TX141TH-BCH Sensor...
Connect Add-on Sensors to Station • The wind station will accommodate up to two additional (TX141TH-BCHv3)* Thermo-Hygro sensors on channels 2 & 3. *Additional sensors sold separately & can be purchased here: www.lacrossetechnology.com/tx141th-bch-temperature-humidity-sensor Note: No additional TX144W wind speed sensors may be added. Connect add-on sensor(s) to the wind station: 1.
Mounting TX141TH-BCHv3 Sensor • To mount the sensor, use the hole at the top to Mounting Hole either hang it from the back using a nail, or inserts one mounting screw through the front • Mount the TX141TH-BCHv3 sensor on a north-facing wall or in any shaded area.
Position Weather Station • Pull out the stand and place on a flat surface. • Or use the two hanging holes on the back to mount on the wall, near an outlet for constant backlight. 1. Choose a location 6 feet or more away from electronics such as cordless phones, gaming systems, televisions, microwaves, routers, etc.
Visit Us on Social Media Latest video content http://bit.ly/LaxTech_YouTube For personalized interaction http://bit.ly/LaxTech_Facebook Join the conversation http://bit.ly/LaxTech__Twitter Pin and share http://bit.ly/LaxTech_Pinterest Care and Maintenance • Do not mix old and new batteries • Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries •...
Specifications Indoor Temperature Range 32°F to 122°F (0°C to 50°C) Humidity Range 10% to 99% RH Update Interval About every 60 seconds Thermo-hygro Sensor Temperature Range -40°F to 140°F (-40°C to 60°C) 10% to 99% RH Humidity Range Update Interval About every 58 seconds Transmission Range 330 feet (100 meters) RF 433MHz...
Warranty and Support La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. Before returning a product, please contact our friendly customer support or visit our online help:...