Power: What Are The Power Requirements For This Station; Power Cord Input: Will This Station Work In Other Countries; Weather Station Factory Restart; Battery Change - La Crosse Technology S85807 Faqs

POWER: WHAT ARE THE POWER REQUIREMENTS FOR THIS STATION?

• TX233RW: 3-AA batteries
• TX233TH: 2-AA batteries
• S85807: 5 volt power cord (required) and 3-AA batteries for optional backup of your
time and date. Battery operation only will not Wi-Fi data. Power cord is required.
Note: Batteries are not included. 5 Volt power cord is included.

POWER CORD INPUT: WILL THIS STATION WORK IN OTHER COUNTRIES?

• Your power cord input is 100-240V 0.3A 50/60Hz, and can work in other countries if
the proper plug adapter is used (not included).
• As a standalone station-, you can use this anywhere.
Note: We cannot guarantee that all "connected" features will work in another country.
The factory reset will return your station to its default settings. This will clear all previous
recorded history, so you may want to write down data before taking this step.
1. Bring the Multi-sensor and Thermo-hygro sensor within 10 feet of your station.
2. Check that both sensors have fresh batteries.
3. Hold the LIGHT and ALERTS buttons together for 5 seconds to reset your station,
clear all records, clear all sensor IDs, and return all settings to default.
4. Your station will fully populate, then return to a normal display and search for
outdoor sensors. (You may want to bring sensors closer and check/change
batteries).
5. While searching for the outdoor sensors the Wind Speed, Outdoor
Temperature/Humidity and Rainfall totals will show dashes.
6. Once connected to the outdoor sensors (allow 3 minutes) the Wind Speed, Outdoor
Temperature/Humidity, and Rainfall will show current readings.
Note: In the absence of wind or rain, these readings will show 00's, indicating sensor
connection.
After a battery change in a sensor, you can search for the sensor again:
1. In normal mode press and release the SENSOR button to view individual sensor ID's
for up to 15 seconds.
2. When you see the sensor's ID number, press and release the + button to search for
that sensor.
La Crosse Technology, Ltd.

WEATHER STATION FACTORY RESTART

BATTERY CHANGE

Page 3