Sensor Area Is Blank (No Dashes Or Numbers); Alerts: Wind, Temp, Humidity; Mounting/Positioning - La Crosse Technology 327-1414WV2 Manual

o 24-hour: Past 24-hour period, from last record.
o Week: Past 7-day period, from last record.
o Month: Defined by Calendar Month i.e. January 1 - January 31.
o Year: Defined by Calendar Year i.e. January 1 - December 31.

SENSOR AREA IS BLANK (NO DASHES OR NUMBERS)

 Check that other areas of the Professional weather station read properly. There
may be a problem with the Professional weather station.
Setting alert value and arming individual alerts are separate functions.
Set alert value:
1. Hold the ALERTS button for 3 seconds to enter alert set mode .
2. The high wind speed alert value will blink in set mode.
3. Press the ARROW buttons to adjust the values.
4. Press the ALERTS button to confirm and move to the next ale rt .
The alert setting order:
 High Wind Speed (channel 1 only)
 Outdoor Humidity HI
 Outdoor Humidity LOW
 Outdoor Temperature HI
 Outdoor Temperature LOW
 Indoor Humidity HI
 Indoor Humidity LOW
 Indoor Temperature HI
 Indoor Temperature LOW
Arm/Disarm Alerts
1. Press and release the ALERTS button to select an alert. HI and LO will f lash.
2. Press the UP arrow button to arm the alert.
3. Press the DOWN arrow button to disarm the alert.
4. The HI or LO alert icon appears when armed.
Active Alert: Beeps once per minute with flashing alert icon.
First, set everything up in the house to be sure it works before mounting the
sensors outside. For best performance, mount the Rain and the Wind
La Crosse Technology, Ltd.

ALERTS: WIND, TEMP, HUMIDITY

MOUNTING/POSITIONING

Page 7