Configuration Tool Settings Screen - Kyocera 1102RW3NL0 Operation Manual

Printing from PC > Configuration Tool

Configuration Tool Settings Screen

Device Defaults Settings
Configure printer driver default settings and the energy save function of the machine.
Item
Print density
MP tray priority
Default emulation
Power off timer
(models for Europe)
Auto error clear
Auto sleep
Adjust print density.
Value: Light, Medium light, Normal, Medium dark, Dark
If paper is set in the multipurpose tray then it is possible for priority to be given to that
multipurpose tray in the paper feed.
Values
Off: The printer driver settings are followed.
Auto Feed: If Auto is selected in the printer driver and there is paper in the multipurpose
tray then the paper feed will be from the multipurpose tray.
Always: If there is paper in the multipurpose tray then the paper feed will be from the
multipurpose tray regardless of what is set in the printer driver.
Select the emulation for operating this machine by commands oriented to other types of
printers.
Values: Line Printer, IBM Proprinter, EPSON LQ-850, PCL 6, KPDL, KPDL(Auto)
Select whether to turn off the power automatically after a period of inactivity.
Value: 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 9 hours, 12 hours, 1 day,
2 days, 3 days, 4 days, 5 days, 6 days, 1 week
If an error occurs during processing, processing stops to wait for the next step to be taken by
the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time
elapses.
Value: Off, On (5 to 495 seconds (in 5 second increments))
Set amount of time before entering Sleep.
Value
For Europe
1 to 60 minutes (1 minute increments)
Except for Europe
1 to 240 minutes (1 minute increments)
4-17
Description