Kyocera 1102RW3NL0 Operation Manual page 68

Installing and Setting up the Machine > Command Center RX
3
4
Display the screen.
Display the E-mail Settings screen.
From the [Function Settings] menu, click [E-mail].
1
2
Configure the settings.
Enter "SMTP" and "E-mail Send Settings" items.
Setting
SMTP
SMTP Protocol
SMTP Server Name
SMTP Port Number
SMTP Server Timeout
Authentication
Protocol
SMTP Security
Connection Test
Domain Restriction
Set to send e-mail from the machine.
Displays the SMTP protocol settings. Check that "SMTP
Protocol" is set to [On]. If [Off] is set, click [Protocol] and set
the SMTP protocol to [On].
*1
Enter the host name or IP address of the SMTP server.
Specify the port number to be used for SMTP. The default port
number is 25.
Set the amount of time to wait before time-out in seconds.
To use SMTP authentication, enter the user information for
authentication.
Set SMTP security.
Turn on "SMTP Security" in "SMTP (E-mail TX)" on the
[Protocol Settings] page.
Tests to confirm that the E-mail function is operating under the
settings without sending a mail.
To restrict the domains, click the [Domain List] and enter the
domain names of addresses to be allowed or rejected.
Restriction can also be specified by e-mail address.
2-43
Description