Lorex SG15F5584 Instruction Manual page 33

Problem:
The image on the Observation System is too dark or too bright
Check:
• Adjust the CONTRAST and BRIGHTNESS of the unit (Refer to the Menu section)
Problem:
The image on the Observation System does appears, but does not have sound
Check:
• Check the VOLUME
• Check the CAMERA connection to the Observation System
• Confirm that the Camera has sound capabilities (Refer to the manual for the camera model
for further information on the Camera functionality)
Problem:
The picture on the Observation System is poor, shrinks or flickers
Check:
• Check the camera video cable and connections
• Disconnect and reconnect the cable at the Observation System and at the Camera
• Clean the camera lens
• Adjust the CONTRAST and BRIGHTNESS settings in the Menu (Page 31)
• Check that the Camera is not in direct sunlight
Problem:
There is no picture appearing on a Channel / Camera is not displaying
Check:
• Check the camera video cable and connections
• Disconnect and reconnect the cable at the Observation System and at the Camera
Try moving the camera to another channel or use another cable
Troubleshooting
33