Sign in today to find solutions:

Forgot your password?

Don't have an account? Sign up

   
Appendices
34
English

Troubleshooting

If you experience trouble with the projector, refer to
the following information. If the problem persists,
please contact your local dealer or service center.
Problem: No image appears on screen
Ensure all the cables and power connections are correctly and
securely connected as described in the "Installation" section.
Ensure the pins of connectors are not crooked or broken.
Check if the projection lamp has been securely installed. Please
refer to the "Replacing the lamp" section.
Make sure you have removed the lens cap and the projector is
switched on.
Ensure that the "AV-Mute" feature is not turned on.
Problem: Partial, scrolling or incorrectly displayed image
Press "Auto" on the remote control or on the control panel.
If you are using a PC:
For Windows 95, 98, 2000, XP:
1. From the "My Computer" icon, open the "Control Panel" folder,
and double click the "Display" icon.
2. Select the "Settings" tab
3. Click on the "Advanced Properties".
For Windows Vista:
1. From the "My Computer" icon, open the "Control Panel" folder,
and double click the "Appearance and Personalization"
2. Select "Personalization"
3. Click "Adjust screen resolution" to display "Display Settings".
Click on the "Advanced Settings".
If the projector is still not projecting the whole image, you will
also need to change the monitor display you are using. Refer to
the following steps.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: