LG BS275 Manual page 37

Message
Standby (Input power cable)
Normal (Power on)
Powering up (Warming up)
Power off (Cooling-I: It can't ac-
cept any key at this status)
Power off (Cooling-II: It can
accept power key to turn on the
projector)
Error (Lamp failed)
Error (Fan lock)
Error (Over temp.)
Steady light =>
No light =>
not turn on until the lamp module has been replaced. To replace
the lamp, follow the procedures in the "Replacing the Lamp".
Problem: LED lighting message
(Green)
Flashing
Flashing
Appendices
POWER-LED
(Amber)
Flashing
LAMP-LED TEMP-LED
(Red) (Red)
Flashing
37
English
English