LG ProBeam BU70QGA.AUS Owner's Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Projector
  5. ProBeam BU70QGA.AUS
  6. Owner's manual
LG ProBeam BU70QGA.AUS Owner's Manual

LG ProBeam BU70QGA.AUS Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
DLP Projector
Please read the safety information carefully before using this product.
BU70QGA (BU70QGA-GL)
www.lg.com
Copyright © 2023 LG Electronics Inc. All Rights Reserved.

Advertisement

Table of Contents
loading

Related Manuals for LG ProBeam BU70QGA.AUS

Summary of Contents for LG ProBeam BU70QGA.AUS

  • Page 1 OWNER'S MANUAL DLP Projector Please read the safety information carefully before using this product. BU70QGA (BU70QGA-GL) www.lg.com Copyright © 2023 LG Electronics Inc. All Rights Reserved.

  • Page 2: Table Of Contents

    CONTENTS PREPARATION TRANSPORTING Checking before transportation INSTALLATION Check before Installation Installation Direction Ceiling-Type Installation Projection Distance per Screen Size Adjusting the Focus and Position of Projection Display Using Multi-Projection Function Kensington Security System USING REMOTE CONTROL Inserting Batteries in the Remote Control Viewing the Remote Control Features MAKING CONNECTIONS Connecting to a PC...

  • Page 3: Preparation

    PREPARATION The pictures may differ slightly from the actual product. Accessories Accessories included with the projector are show below. Accessories are subject to change without prior notice. New accessories may be added or old ones removed. Remote Control Owner's Manual Two AAA Batteries D-Sub To Phone Jack Cable Power cord...
  • Page 4 Optional Extras To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store where you purchased the product. Optional accessories are subject to change without prior notice.
  • Page 5 Parts and Components Distance sensor Camera Inlet Vent IR Receiver Lens Speaker 1) Do not touch the lens when using the projector. The lens may be damaged. (Keep lens away from sharp objects.)
  • Page 6 Buttons Speaker Outlet Vent Bottom of the Projector Adjustable Leg 1) Due to the high temperature of vent area, do not get close to the vent area. 2) Turn the adjustable leg left or right to adjust the angle.
  • Page 7 9 10 Port Port Port Port Port (HDBaseT) Port IR Receiver Port Port (IR IN) Port (AC IN Port)
  • Page 8 Using the Button You can operate the projector by pressing the button or moving the button left, right, up, or down. • Power On Button: With the projector off, press the Power button once and then release it. • Power Off Button (Press and Hold): With the projector on, press the Power button for 3 seconds or longer and then release it.
  • Page 9 Projector Status Indicators LED Power Indicator LED Power Indicator Power standby state The projector is operating with the power on.

  • Page 10: Transporting

    TRANSPORTING Checking before transportation We will not be held responsible for the product damage caused by not following the guide. Press the button on the remote control and the product. Repeatedly press the Up/Down buttons on the remote control and the product until the desired Lens movement control screen is displayed.

  • Page 11: Installation

    INSTALLATION Check before Installation We will not be held responsible for the product damage caused by not following the guide. CAUTION • Do not overlap the projectors with each other. NOTE • It is recommended to set the Focus, Zoom, and Lens Shift at least 20 minutes after the projection starts, as the image may not be stable immediately after the projector is turned on.

  • Page 12: Projection Distance Per Screen Size

    Projection Distance per Screen Size Place the projector on a sturdy, level surface, together with the PC or audio/ video source. Place the projector an appropriate distance away from the screen. The distance between the projector and the screen determines the actual size of the image. Position the projector so that the lens is at a right angle to the screen.
  • Page 13 16:9 Aspect Ratio (1.6 x Zoom) Projection Screen Size Screen Width (Y) Screen Height (X) Distance (D) inches inches inches inches 1016.2 34.8 885.7 19.6 498.2 52.1 1325 1525.2 52.3 1329.3 29.4 747.7 79.3 2015 2034.2 69.8 1773.0 39.2 997.3 106.4 2705 2543.1...
  • Page 14 16:9 Aspect Ratio (1.0 x Zoom) Projection Screen Size Screen Width (Y) Screen Height (X) Distance (D) inches inches inches inches 1016.2 34.8 885.7 19.6 498.2 85.0 2160 1525.2 52.3 1329.3 29.4 747.7 128.3 3260 2034.2 69.8 1773.0 39.2 997.3 171.8 4365 2543.1...
  • Page 15 Adjusting the Size of Projection Display Press the button on the remote control and the product. Repeatedly press the Up/Down buttons on the remote control and the product until the [Zoom] adjustment screen is displayed. Press the Left/Right buttons of the remote control and the product to adjust the size of the projection display.

  • Page 16: Adjusting The Focus And Position Of Projection Display

    Adjusting the Focus and Position of Projection Display Be careful not to shake the product. Automatically adjusts the Focus, Zoom, Lens, and Keystone of the projection display of the projector. (Settings) → [EZ Setting] → [Installation Wizard] → [Auto Screen •...
  • Page 17 Adjusting the Position of Projection Display in detail Use it when adjusting the position of the projection display without moving the projector up/down/left/right by using the [V-Shift]/[H-Shift]. Press the button on the remote control and the product. Repeatedly press the Up/Down buttons on the remote control and the product until the desired Lens movement control screen is displayed.

  • Page 18: Using Multi-Projection Function

    Using Multi-Projection Function You can set up to 9 projectors to project a big, broad image. To make a smooth screen, you can adjust the differences in brightness and colors between projected images. (Settings) → [EZ Setting] → [Installation Wizard] → [Edge Blending] → •...
  • Page 19 [Edge Blending] – Setting Video Wall If you make a big single image with multiple projectors, designate a projection position for each projector. Video Wall - Setting Tile Mode Turn on all projectors. Set the [Tile Mode] of [Video Wall] to On. Adjust the placement of each projected image.
  • Page 20 [Edge Blending] - Setting Blending Use the Edge Blending function to naturally overlap several images on the brightness slope of the overlapped area. When performing Edge Blending Before Setting After Setting Sequence of Adjusting Edge Blending • Whole image — [Video Wall]: [Tile Mode] On → [Blending Settings]: [Blending Range Settings] →...
  • Page 21 Set the [Tile Mode] of [Video Wall] to On. Set the blending range. ([Blending Range Settings]) 1. Set the [Aspect Ratio]. • Select 16:9, the original ratio, before setting the overlap area. • Position the projector to fit the area you wish to overlap. 2.
  • Page 22 3. Set the [Clip Range]. • Adjust the currently displayed image by adjusting [H]/[V]. • Vertical Expand/Reduce: Vertically expand or reduce the clip-adjusted image. • Horizontal Expand/Reduce: Horizontally expand or reduce the clip- adjusted image. [Clip Range] - [H] Adjustment Reduce Default Value Expand...
  • Page 23 4. Set the [Zoom] range. • Adjust the currently displayed image by adjusting [H]/[V]. • Vertical Expand/Reduce: Vertically expand or reduce the image. • Horizontal Expand/Reduce: Horizontally expand or reduce the image. [Zoom] - [V] Control [Zoom] - [H] Control Set the [Blending Mode] of [Blending Settings] to On.
  • Page 24 Set the blending quality. ([Blending Quality Settings]) 1. Adjust the [Brightness Level]. • Adjust the brightness of the projector by adjusting [Brightness Level]. 2. Adjust the [White Balance]. Menu Function [Menu Position] Select the position of the Settings menu. (Upper right end, lower right end, upper left end, lower left end) [Picture Mode] Select the image mode among Shopping Mall/QSR,...

  • Page 25: Kensington Security System

    Kensington Security System • This projector has a Kensington Security Standard connector as an anti-theft mechanism. Connect a Kensington Security System cable as shown below. • For more information on installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. •...

  • Page 26: Using Remote Control

    USING REMOTE CONTROL Inserting Batteries in the Remote Control Use 1.5 V, AAA-type alkaline batteries. Replace the two batteries with new ones and insert them according to the direction indicator inside the remote control. Remove the battery cover on the back of the remote control.

  • Page 27: Viewing The Remote Control Features

    Viewing the Remote Control Features (Power) Turns the Projector on or off. (Input) Selects the input mode. Turns the Projector on. Turns the Projector off. Reduces power consumption by adjusting peak screen brightness. You can adjust Focus, Zoom, and Lens Shift. —...
  • Page 28 (Volume Button) Adjusts the volume level. (Aspect Ratio) Selects the screen size. Shows information on the current screen. (Mute) Mutes all sounds. (Brightness Up/Down) Adjusts the brightness of the display. (Page Up/Down) Moves to the previous or next screen. (Picture Mode) Selects the Picture Mode.
  • Page 29 (Settings) Accesses the main menus or saves your input and exit menus. (Up, Down, Left, Right, OK) After selecting the menu, select and adjust functions. Blanks the screen. (Back) Returns to the previous screen. Exits the menu. Allows you to control various multimedia devices to enjoy multimedia simply by using the remote control through the SIMPLINK menu.
  • Page 30 NOTE • When using the remote control, the optimal operation range is 6 meters (19.6 feet) or less (left/right) and within a 30 degree arc of the remote control IR receiver. • If a cable is connected to the back port, the optimal operating range is 3 meters (9.8 feet) or less (left/right) and within a 30 degree arc of the remote control IR receiver.

  • Page 31: Making Connections

    MAKING CONNECTIONS You can connect various external devices to your projector. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cables are not provided.
  • Page 32 NOTE • For the best image quality, using the projector with HDMI connection is recommended. • To comply with the standard specifications of the product, use a shielded interface cable with a ferrite core, such as a DVI-D cable. • If you turn the projector on when the set is cold, the screen may flicker.

  • Page 33: Connecting Multiple Projectors

    Connecting Multiple Projectors • Images may differ according to the model. To use multiple products, connect an external device to a product and then connect one side of the supported signal input cable to the (output) connector of the product, and connect the other side to the (input) connector of another product to be connected.

  • Page 34: Safety Precautions

    SAFETY PRECAUTIONS Please take note of the safety instructions to prevent any potential accident or misuse of the projector. Child injuries can be prevented by following these simple safety precautions. The precautions should be followed in the same manner when you store or move your existing projector.
  • Page 35 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Indoor Installation WARNING Do not install products including projectors and remote controls in the following places: — Any place exposed to direct sunlight; — Any humid place such as bathroom; —...
  • Page 36 Keep the following precautions in mind to prevent the temperature rise inside the projector: — Install the air vents at least 30 cm (11.8 inches) away from the wall. — Do not install the product in a place where it cannot be ventilated, such as on a bookcase or in a closet.
  • Page 37 CAUTION When moving the projector, be sure to turn off the power switch and disconnect the power plug, antenna cable and the connection cord between the devices. • A failure to do so may cause damage to the projector or the cord, resulting in a fire or electric shock.
  • Page 38 When in Use WARNING When thunder or lightning strikes, unplug the power cord and do not touch the antenna wire. • It may cause an electric shock. If there is a gas leak from the gas lines, do not touch the outlet and be sure to vent by opening the window.
  • Page 39 Keep the plastic wrapping of the product out of the reach of children. • If a child misuses it, it may suffocate the child. Do not touch near the vents during the operation or immediately after the power is turned off as they generate intense heat. •...
  • Page 40 CAUTION Do not use any product that uses high voltage electricity near the projector. (e.g. An electric fly swatter) • It may cause a malfunction. Do not place any liquid containers such as a vase, pot, cup, cosmetics or medicine, decorations such as candles or any heavy objects on top of the projector.
  • Page 41 Do not mix old and new batteries together. • It may cause battery rupture or fire due to liquid leakage or may cause electrical shock. When replacing the batteries, make sure that they are properly installed according to the polarities (+, -). •...
  • Page 42 Power WARNING Make sure the power plug is securely plugged in to prevent it from shaking. • If the connection is unstable, it may cause a fire. Do not plug too many devices into one multi-power outlet. • This may result in fire due to the power outlet overheating. Do not insert a metal object such as chopsticks into the other end of the power plug while it is plugged into a wall outlet.
  • Page 43 Keep the power cord away from heat sources. • The coating of the cord may melt and cause a fire or electric shock. Use only the authorized power cord or AC adapter supplied by LG Electronics. Do not use any other products. •...
  • Page 44 Cleaning WARNING Do not spray water directly onto the projector when cleaning it. • It may cause a fire or electric shock. CAUTION How to clean the projector — Disconnect the plug from the outlet before cleaning. — Do not wipe the optical system (the lens and mirror) immediately after the power is turned off.
  • Page 45 Laser WARNING • You risk being exposed to laser radiation if you manipulate or alter the product in a way not specified in the user manual. • Be sure not to let infants or people with diseases directly watch the light source. CAUTION •...

  • Page 46: Checking Before Reporting Malfunction

    CHECKING BEFORE REPORTING MALFUNCTION Please check the list below when you experience the following symptoms during use of the product. It may not be a failure. Projector Safety Check Symptoms • The projector does not display anything on the screen or output sound when it is turned on.

  • Page 47: Troubleshooting

    Troubleshooting Symptoms Causes and Solutions I cannot turn on • Please make sure your projector power plug is correctly the Projector. connected to the outlet. • There may be a problem with the outlet, so try plugging the power cord of another product into the outlet where the projector was plugged in.
  • Page 48 This noise is normal and does not affect the projector’s functions. LG Electronics manages the manufacturing of projectors according to strict standards. A fixed level of noise does not indicate a problem.

  • Page 49: Checking Information

    CHECKING INFORMATION Specifications MODEL BU70QGA (BU70QGA-GL) Resolution (Pixel) 3840 (Horizontal) × 2160 (Vertical) Aspect ratio 16:9 (Horizontal:Vertical) Projection distance 1325 mm to 10290 mm (52.1 inches to 405.1 inches) — Screen size — 1016.2 mm to 7618.7 mm (40 inches to 300 inches) Ratio of upward 110 % projection...

  • Page 50: Hdmi/Hdbaset Supported Mode

    HDMI/HDBaseT Supported mode Horizontal Frequency Resolution Vertical Frequency (Hz) (kHz) 640 x 480 31.46 59.94 640 x 480 31.5 720 x 480 31.47 59.94 720 x 480 31.5 720 x 576 31.25 1280 x 720 44.96 59.94 1280 x 720 1280 x 720 37.5 1920 x 1080i...
  • Page 51 Horizontal Frequency Resolution Vertical Frequency (Hz) (kHz) 640 x 350 31.46 70.09 720 x 400 31.46 70.08 640 x 480 31.46 59.94 800 x 600 37.87 60.31 1024 x 768 48.36 1280 x 1024 63.98 60.02 1920 x 1080 67.5 3840 x 2160 53.95 23.98...

  • Page 52: Licenses

    LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.

  • Page 53: Other Specifications

    Other specifications As with any bright light source, do not stare into the beam, RG2 IEC 62471- 5:2015. Risk Group 2 CAUTION Possibly hazardous optical radiation emitted from this product. Do not stare at operating lamp. May be harmful to the eye. This label is attached to the bottom of the product and language may differ.

  • Page 54: Symbols

    Symbols Refers to alternating current (AC). Refers to direct current (DC). Refers to class II equipment. Refers to stand-by. Refers to “ON” (power). Refers to dangerous voltage.
  • Page 56 Your projector’s OSD (On Screen Display) may differ slightly from that shown in this manual. [ ]: the buttons and the text to be displayed on the projector screen. www.lg.com Copyright © 2023 LG Electronics Inc. All Rights Reserved.
  • Page 57 [Player] [System Information] [Scheduler] [Set ID] [Editor] [Time & Date] - Group Manager 2.0 ............48 [Power] - Screen Share ..............51 [Network] How to Use [Screen Share] [User Agreement] - LG Presenter..............52 [Audio Guidance] How to use LG Presenter [Advanced Setting]...
  • Page 58 MANAGEMENT TOOLS ....53 - Control Manager ............53 - Picture ID ................54 IR CODE ........55 CONTROLLING MULTIPLE PRODUCTS ........57 - Connecting cables ............57 - Communication Parameter ........58 - Command Reference List ..........59 - Transmission/Reception Protocol ......63 TROUBLESHOOTING ....81 - Troubleshooting Power/Remote Issues .....81 - Troubleshooting Screen Issues .......82 - Troubleshooting Sound Issues ........83...

  • Page 59: Settings

    SETTINGS Home Global Buttons • [Input]: Navigate to the external input selection screen • [Setting]: Navigate to the Settings screen Dashboard • This feature displays key information about your Projector in the center of the home screen. In the Dashboard, you can manually change settings by selecting the corresponding items.

  • Page 60: Ez Setting

    Ez Setting [Installation Wizard] [Ez Setting] [Installation Wizard] • [PJT Mode]: This function turns the projected image upside down or flips horizontal. • [Edge Adjustment]: [Edge Adjustment] adjusts the horizontal and vertical sides of the projected image if the projector is at an angle and not perpendicular to the screen. This feature ensures the shape of the projected image is not distorted.
  • Page 61 - Some models may not be supported. • [Remote Setting]: The power button on the LG TV remote control can be used separately or together with the projector. - [Projector + TV]: The power on the projector and TV can be used together. You can turn the projector on and off with the LG TV remote control.

  • Page 62: [On/Off Scheduler]

    [On/Off Scheduler] [Ez Setting] [On/Off Scheduler] Set a schedule to use your Projector by time and day of the week. • [On/Off Time Setting]: Set on/off times for each day of the week. • [Holiday Setting]: Set holidays by date and by day of the week. [SI Server Setting] [Ez Setting] [SI Server Setting]...

  • Page 63: [Fail Over]

    [Fail Over] [Ez Setting] [Fail Over] Set the priority of the input devices when a fault occurs. Automatically play the content stored in the device or run the set app. • [On/Off]: Turns [Fail Over] on or off. • [Input Priority]: Set the priority of input sources for fail over. •...

  • Page 64: [Status Mailing]

    [Status Mailing] [Ez Setting] [Status Mailing] This feature configures the system so that the status of the device is assessed and then notified to the administrator by e-mail. • [On/Off]: Turns [Status Mailing] on or off. • [Mailing Option], [Scheduling]: Sets the email sending interval. •...

  • Page 65: [Play Via Url]

    [Play via URL] [Ez Setting] [Play via URL] Play content you want to play automatically through the built-in web browser. • [URL Loader]: Turns [Play via URL] on or off. • [Set URL]: Enter the URL address to display automatically. •...

  • Page 66: [Lg Connectedcare]

    1) [ENTER ACCOUNT NUMBER]: Enters the 6-digit account number to install the [LG ConnectedCare] solution. - Account Number: The number assigned when the [LG ConnectedCare] solution is registered. When the account number is entered, the account name corresponding to the number is obtained.

  • Page 67: [Multi Screen]

    [Multi Screen] [Ez Setting] [Multi Screen] This feature allows you to view multiple external inputs and videos on a single screen. PIP Mode PBP Mode 3-Screen Split Mode 4-Screen Split Mode NOTE • In multi-screen mode, the HDMI daisy chain feature is not supported. •...
  • Page 68 Changing Screen Input Press the button on the top right of each split screen to select the desired input. NOTE • Inputs which have already been selected for other split screens cannot be selected again. To select them, press the reset button to reset the inputs for all screens first.

  • Page 69: [Office Meeting Mode]

    [Office Meeting Mode] [Ez Setting] [Office Meeting Mode] You can set up Quick Functions to use the product in a conference room. • [Office Meeting Mode]: Turning on this feature enables you to set functions related to the conference room meeting mode.

  • Page 70: General

    General [Language] [General] [Language] You can select the menu language to be displayed on the screen. • [Menu Language]: Sets the language of your Projector. • [Keyboard Language]: Sets the language of the keyboard displayed on the screen. [System Information] [General] [System Information] This feature displays information such as the device name, software version, and storage space.
  • Page 71 [Power] [General] [Power] Power-related feature settings [No Signal Power Off (15 Min)] Set whether to use the 15 Min Auto Off feature. • You can set this option to [On] or [Off]. • If you set this feature to [On], the product turns off after it’s remained in No Signal status for 15 minutes. •...
  • Page 72 [PM Mode] • [Power Off(Default)]: Set the normal DC off mode. • [Sustain Aspect Ratio]: The PC retains the Extended Display Identification Data (EDID) even when the power is off. • [Screen Off]: Switches to [Screen Off] status when entering DPM, Auto Power Off (15 min, 4 hours), or Abnormal Shut Down mode.
  • Page 73 [Power On/Off History] Display the device’s power on/off history. [Quick Start+] This setting puts your Projector in standby mode when it’s turned off so it will help using Projector’s functions quicker when you turn the Projector back on. • Some models may not be supported. •...
  • Page 74 [Certificate Download] • Download the certificates used for 802.1X EAP stored in USB. • Only pem file extension can be downloaded. NOTE • On models that support Wi-Fi dongles, the Wireless Network Connection menu is enabled only when a Wi-Fi dongle is connected.
  • Page 75 [Ping Test] Check your network status with the ping test. [Port Control] Unused ports can be blocked for network security. [Connection Domain] Change domain for checking network connection. NOTE • A reboot is recommended for the settings to be applied properly.
  • Page 76 For details, contact your ISP. • LG is not responsible for any malfunction of the display or Internet connection failures due to communication errors/ malfunctions associated with your Internet connection or other connected equipment.

  • Page 77: [User Agreement]

    Tips for When Configuring Wireless Network Settings • The wireless network may be affected by interference from a device that uses 2.4 GHz frequency, such as a wireless telephone, Bluetooth device or microwave. Interference may also be caused by a device that uses 5 GHz frequency such as Wi-Fi devices.

  • Page 78: [Advanced Setting]

    2.4GHz. • When you set iBeacon, LG Beacon will be set to be the same as the value of iBeacon field. But the LG Beacon setting item won’t be provided separately.
  • Page 79 [Control Interface] Devices connected to the display can be controlled via the interface. • [PC Power Control]: Enable you to control the power of PC as you turn the display on and off. - [Disable]: Disable [PC Power Control]. - [Sync(On)]: Set the PC power to be turned on when the display is turned on. - [Sync(On/Off)]: Set the PC power to be turned on when the display is turned on and set the PC power to be turned off when the display is turned off.
  • Page 80 [SIMPLINK Setup] • When the [SIMPLINK Setup] is set to [On], you can use the SIMPLINK provided by LG Projector. • [Device ID]: Set the ID of the device connected via CEC wiring. You can choose a value between [All] and [E].
  • Page 81 .pem, .crt in the USB root directory are recognized and can be added or deleted through the menu. All certificates stored at the time of [Factory Reset] are deleted. [LG promota] This feature allows connection of promota app on mobile device.

  • Page 82: Display

    Display [Picture Mode] [Display] [Picture Mode] [Mode] This feature enables you to choose the optimal picture mode for your installation environment. • [Mall/QSR], [Transportation], [Education], [Gov./Corp.]: Display the picture optimally for your installation environment. • [General]: Display the picture at normal contrast, brightness, and sharpness. •...
  • Page 83 [Customize] • [Contrast]: Adjust the difference between the light and dark areas of the picture. The closer the value is to 100, the greater the difference is. • [Brightness]: Adjust the overall brightness of the screen. The closer the value is to 100, the brighter the screen is. •...
  • Page 84 • [Picture Option]: Customize the picture options. - [Noise Reduction]: Remove randomly popping dots to make the picture look clearer. - [MPEG Noise Reduction]: Reduce the noise generated in the process of creating a digital video signal. - [Smooth Gradation]: Reduces step-shaped irregularities in the image edges, resulting in a smooth display. - [Black Level]: Adjust the brightness and contrast of the screen by adjusting the black level of the screen.

  • Page 85: [Aspect Ratio]

    [Aspect Ratio] [Display] [Aspect Ratio] This feature enables you to change the picture size to view the picture at its optimal resolution. • [Full]: Stretch the picture to fill the screen. • [Original]: Display the picture at its original resolution. [Rotation] [Display] [Rotation]...

  • Page 86: [Advanced Setting]

    [Advanced Setting] [Display] [Advanced Setting] [UHD Deep Color] If you connect an HDMI or DP device to one of the Deep Color adjustable ports, you can select between UHD Deep Color On (6G) or Off (3G) in the UHD Deep Color settings menu. If a compatibility issue occurs with a graphics card when the Deep Color option is set to On at 3840 x 2160 @ 60 Hz, set the Deep Color option back to Off.
  • Page 87 [Energy Saving] • [Brightness Control]: Adjust the brightness of the screen to save energy. - Minimum/Medium/Maximum: Use energy saving according to the energy saving level set for the Projector. NOTE • Return to default settings by clicking [Admin] -> [Factory Reset]. [HDMI IT Content] Set the HDMI IT Contents function.

  • Page 88: Sound

    Sound [Sound Mode] [Sound] [Sound Mode] [Sound Mode] The best sound quality will be selected automatically depending on the video type currently being watched. • [Standard]: This sound mode works well for content of all types. • [Cinema]: Optimize sound for watching movies. •...

  • Page 89: [Sound Out]

    Some recently connected devices may automatically attempt to reconnect to the Projector when it is turned on. • It is recommended that you set LG audio devices that support LG Sound Sync to LG TV mode or LG Sound Sync mode before connecting.

  • Page 90: [Audio Out]

    [Audio Out] [Sound] [Audio Out] • [Off]: Disables the use of [Audio Out]. (No audio outputted.) • [Variable]: You can specify an output range for the external audio device connected to the Projector and adjust the volume within the range. You can change the volume of an external audio device within the range of 0 to 100 (the same as the Projector speaker volume).

  • Page 91: [Digital Sound Output]

    [Digital Sound Output] [Sound] [Digital Sound Output] Enables you to configure the settings for Export Digital Sound. • [Sound] This can be set if [Sound Out] is optical digital/HDMI ARC. • Sound effect output may not work if using Pass Through. •...

  • Page 92: Admin

    Admin [Lock Mode] [Admin] [Lock Mode] [Home Dashboard Lock] When you set the Home Dashboard Lock, you can limit the change in the settings of the Home Dashboard. [USB Lock] This feature enables you to configure the USB lock feature so that settings or content cannot be changed. [OSD Lock] This feature enables you to configure the OSD lock feature so that settings or content cannot be changed.

  • Page 93: [Change Password]

    [Wi-Fi Lock] This feature enables you to turn the Wi-Fi feature on or off. [Screen Share Lock] • [On]: This feature enables you to turn the Screen Share feature off. • [Off]: This feature enables you to turn the Screen Share feature on. •...

  • Page 94: [Factory Reset]

    [Factory Reset] Initializes all settings in [Setting] and files from the internal storage. The exceptions are RGB gain value of [Calibration] mode, [Installation Wizard] ([Video Wall] -> [Tile Mode], [Tile Mode Setting]) and [Server Setting] items of [Ez Setting], and [Set ID] items of [General]. (Depending on model) NOTE •...

  • Page 95: Content Manager

    CONTENT MANAGER Web Login • Different features are supported depending on the product. This Projector product comes with a feature that enables you to access it on your PC or mobile device. - Content Manager, Group Manager 2.0, Control Manager, Log Out, Change Password menus are provided. •...
  • Page 96 [Delete] Select your desired type of content from the tab on the left and click [Delete] in the upper right-hand corner of the screen. Select the content you wish to delete. Click [Delete] in the upper right-hand corner of the screen. You can see that the content has been deleted.
  • Page 97 [Scheduler] (Scheduler) The Content Manager app’s scheduler feature enables certain content to be played at a scheduled time through a playlist or external input. [Creating a Schedule] Click [New Schedule] in the upper right-hand corner of the screen. Choose between [Playlist] and [Input Source]. 1) If you have selected [Playlist], select the playlist you wish to schedule the playback of.
  • Page 98 [Delete Schedule] Click [DELETE] in the upper right-hand corner of the screen. Select the schedules you wish to delete. Click [DELETE]. Check that the schedules have been deleted. [Calendar View] When you have registered schedules, click [Calendar View]. You can see that the schedules registered are displayed in the form of a timetable. [Distribute] Click [Distribute] in the upper right-hand corner of the screen.
  • Page 99 Supported Photo & Video Files NOTE • Subtitles are not supported. Supported video codecs Extension Codec .asf, .wmv Video VC-1 Advanced Profile (except for WMVA), VC-1 Simple and Main Profiles Audio WMA Standard (excluding WMA v1/WMA Speech) .avi Video Xvid (except for GMC), H.264/AVC, Motion Jpeg, MPEG-4 Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM .mp4, .m4v, .mov...
  • Page 100 • ULTRA HD video (ULTRA HD models only): 3840 X 2160, 4096 X 2160 • Some HEVC-encoded ULTRA HD videos other than the content officially provided by LG Electronics may not be played. • Some codecs can be supported after a software upgrade.
  • Page 101 Tips for using USB storage devices • Only USB storage devices are recognized. • USB storage devices connected to the Projector through a USB hub may not work properly. • USB storage devices that use an automatic recognition program may not be recognized. •...
  • Page 102 • If your USB storage device has multiple partitions, or if you use a USB multi-card reader, you can use up to four partitions or USB memory devices. • If a USB storage device is connected to a USB multi-card reader, its volume data may not be detected. •...

  • Page 103: Group Manager 2.0

    Group Manager 2.0 This feature enables you to group together multiple Projector sets on a single network into the same group and to distribute content (schedules and playlists) or copy setting data on a group basis. This feature has two modes, Master and Slave, and it can access the browser on your PC or mobile device.
  • Page 104 [GROUP MANAGEMENT] • Creating a New Group 1. Click [Add New Group]. 2. Enter a group name. 3. Click [Add Device], select the devices you wish to add to the group, and add them. 4. Click [Done], and you will see that a new group has been created. •...
  • Page 105 [Setting Data Cloning] Select your desired group and click Clone. Check that the data have been copied on the slave sets. [Content Distribute] Select the type of content you wish to distribute (Schedules or Playlists). Select the content you wish to distribute. Select the group to which you wish to distribute the content and click [Distribute].

  • Page 106: Screen Share

    Screen Share This feature allows the screen of a user’s device such as a mobile or PC Windows to be shared with a display using a wireless connection such as WiDi or Miracast. How to Use [Screen Share] [Screen Share] Connect according to the instructions provided by the guide that can be accessed through the CONNECTION GUIDE button in the upper right.

  • Page 107: Lg Presenter

    The Projector and PC must be on a network where they can be connected to each other. • If Screen Share does not work or if a normal connection cannot be made to the Projector device, check the firewall settings on your PC. • LG Presenter does not support video playback.

  • Page 108: Management Tools

    MANAGEMENT TOOLS Control Manager Control and check the status of the display through the Web browser. This function is available for PCs and mobile devices. Different features are supported depending on the product. Function • [Dashboard]: Display a summary of the product’s status and provides links to each page. •...

  • Page 109: Picture Id

    Picture ID AUDIO (RGB/DVI) RS-232C OUT RS-232C OUT RS-232C OUT [Picture ID] is used to change the settings of a specific set (display) using a single IR receiver for multi-vision. Communication is possible between a Projector with an IR receiver and other Projectors using RS-232C cables. Each RS-232C IN RS-232C IN RS-232C IN...

  • Page 110: Ir Code

    IR CODE • All models do not support the HDMI/USB function. • Some key codes may not be supported depending on the model. Code (Hex) Function Remarks Remote control button (Power) (Projector on) Remote control button (Projector off) Remote control button Remote control button INPUT (Select input) Remote control button...
  • Page 111 Code (Hex) Function Remarks (Settings/Menu) Remote control button Remote control button (Information) (Up) Remote control button (Down) Remote control button Remote control button (Right) (Left) Remote control button Remote control button (OK) (BACK) Remote control button (Installation Wizard) Remote control button (Exit) Remote control button (red)

  • Page 112: Controlling Multiple Products

    CONTROLLING MULTIPLE PRODUCTS • This only applies to certain models. Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting cables •...

  • Page 113: Communication Parameter

    Communication Parameter • Baud Rate: 9600 bps • Data Length: 8 bits • Parity Bit: None • Stop Bit: 1 bit • Flow Control: None • Communication Code: ASCII code NOTE • When using 3-wire connections (non-standard), an IR daisy chain cannot be used. •...

  • Page 114: Command Reference List

    Command Reference List The configurable items differ depending upon model. Command Data (Hexadecimal) 01. [Power] 00 to 02 02. Select Input See Select Input 03. [Aspect Ratio] See [Aspect Ratio] 04. [Brightness Control] 00 to 03 05. [Picture Mode] See [Picture Mode] 06.
  • Page 115 Command Data (Hexadecimal) 27. [White Balance] Red Gain 00 to FE 28. [White Balance] Green Gain 00 to FE 29. [White Balance] Blue Gain 00 to FE 30. [White Balance] Red Offset 00 to 7F 31. [White Balance] Green Offset 00 to 7F 32.
  • Page 116 Command Data (Hexadecimal) 52. [Contents Sync] 00 to 01 53. [External Input Rotation] n, 85 00 to 03 54. [Beacon] n, 88 00 to 01 55. [Multi Screen] Mode & Input See [Multi Screen] Mode & Input 56. [Aspect Ratio] (Multi screen) See [Aspect Ratio] (Multi screen) 57.
  • Page 117 Command Data (Hexadecimal) 77. [Timer Power On] Scheduling See [Timer Power On] Scheduling 78. [Timer Power Off] Scheduling See [Timer Power Off] Scheduling 79. LCIN008 Control n, b8 See LCIN008 Control 80. [Transfer Control] n, cb See [Transfer Control] 81. Multichannel n, 76 01 to 09 82.

  • Page 118: Transmission/Reception Protocol

    Transmission/Reception Protocol Transmission (Command1)(Command2)( )(Set ID)( )(Data)(Cr) * (Command1): This command is used to identify between the adjustment setting or the user adjustment modes. * (Command2): This command is used to control the Projector. * (Set ID): Used for selecting a set you want to control. A unique Set ID can be assigned to each set ranging from 1 to 1000 (01H to 3E8H) under Settings in the OSD menu.

  • Page 119: Select Input

    01. [Power] (Command: k a) 04. [Brightness Control] (Command: j q) Controls the power on/off status of the Projector. Sets the brightness of your Projector. Transmission Transmission (k)(a)( )(Set ID)( )(Data)(Cr) (j)(q)( )(Set ID)( )(Data)(Cr) Data 00: [Off] Data 01: [Minimum] 01: [On] 02: [Medium] 02: Restart...

  • Page 120: Color Temperature] X U

    08. [Sharpness] (Command: k k) 13. [Sound Mode] (Command: d y) Adjusts the screen sharpness. Selects a sound mode. Transmission Transmission (k)(k)( )(Set ID)( )(Data)(Cr) (d)(y)( )(Set ID)( )(Data)(Cr) Data 00-32: Sharpness 0-50 Data 01: [Standard] 02: [Music] Acknowledgment 03: [Cinema] (k)( )(Set ID)( )(OK/NG)(Data)(x) 04: [Sports] 05: [Game]...

  • Page 121: Current Time] 1 (Year/Month/Day)

    16. [Current Time] 1 (year/month/day) (Command: 19. [No IR Power Off (4hour)] (Command: m n) f a) Activates Auto Power Off when there is no IR signal for 4 hours. Sets the Clock 1 (year/month/day) values and Auto Time. Transmission Transmission (m)(n)( )(Set ID)( )(Data)(Cr) 1.

  • Page 122: Default] Settings F K

    21. [Default] Settings (Command: f k) 26. [Software Version] (Command: f z) Executes Reset. Checks the software version of the product. (Initialize Screen can only be executed in RGB input mode.) Transmission Transmission (f)(z)( )(Set ID)( )(Data)(Cr) (f)(k)( )(Set ID)( )(Data)(Cr) Data FF: Check the software version Data...

  • Page 123: White Balance] Red Offset S X

    30. [White Balance] Red Offset (Command: s x) 34. [Tile Mode] (Command: d d) Adjusts the red offset value for white balance. Sets a tile mode and values for the tile rows and columns. Transmission Transmission (s)(x)( )(Set ID)( )(Data)(Cr) (d)(d)( )(Set ID)( )(Data)(Cr) Data 00-7F: Red Offset 0-127...

  • Page 124: Dpm (Standby Mode)] F

    37. [DPM (Standby Mode)] (Command: f j) 40. Select [Fail Over] Mode (Command: m i) Sets the DPM(Display Power Management) function. Selects the Fail Over mode. Transmission Transmission (f)(j)( )(Set ID)( )(Data)(Cr) (m)(i)( )(Set ID)( )(Data)(Cr) Data 00: [Off] Data 00: [Off] 02: 10 seconds 01: [Auto]...

  • Page 125: Local Key Operation Lock]

    43. [Local Key Operation Lock] (Command: t o) 45. [Daylight Saving Time] (Command: s d) Configures the local key operation settings of the product. Sets Daylight Savings Time. Transmission Transmission (t)(o)( )(Set ID)( )(Data)(Cr) (s)(d)( )(Set ID)( )(Data1)( )(Data2)( ) (Data3)( )(Data4)( )(Data5)( )(Cr) Data 00: Unlocks all keys...

  • Page 126: Network Settings] S

    47. [Network Settings] (Command: s n, 80 or 81 or 48. [Power On Status] (Command: t r) Sets the Power On status of the Projector. Configures network and DNS settings. Transmission Transmission (t)(r)( )(Set ID)( )(Data)(Cr) (s)(n)( )(Set ID)( )(Data1)( )(Data2)( ) Data 00: [LST(Last Status)] (Data3)( )(Data4)( )(Data5)(Cr)

  • Page 127: Time Sync] S N

    51. [Time Sync] (Command: s n, 16) 54. [Beacon] (Command: s n, 88) Sets Time Sync. Turns on/off Beacon. Transmission Transmission (s)(n)( )(Set ID)( )(1)(6)( )(Data)(Cr) (s)(n)( )(Set ID)( )(8)(8)( )(Data)(Cr) Data 00: [Off] Data 00: [Off] 01: [On] 01: [On] * This feature only works when the Projector is in Master Acknowledgment mode.

  • Page 128: Aspect Ratio] (Multi Screen) X D

    56. [Aspect Ratio] (Multi screen) (Command: x d) 59. Stop Video (Command: k x) Controls the aspect ratio of Multi Screen. Controls Stop Video. Transmission Transmission (x)(d)( )(Set ID)( )(Data1)( )(Data2)(Cr) (k)(x)( )(Set ID)( )(Data)(Cr) Data1 01: Controls the Main input Data 00: The Stop Video feature is on.

  • Page 129: Holiday Setting] S N, 9B

    63. [Holiday Setting] (Command: s n, 9b) 3. Deleting a Schedule E0: Deletes all holiday schedules Sets holidays. E1: Deletes the 1st holiday schedule Transmission E2: Deletes the 2nd holiday schedule 1. (s)(n)( )(Set ID)( )(9)(b)( ) E3: Deletes the 3rd holiday schedule (Data1)( )(Data2)( )(Data3)( ) E4: Deletes the 4th holiday schedule (Data4)( )(Data5)( )(Data6)(Cr)

  • Page 130: Home Dashboard Lock] S N, 9D

    64. [UPnP] (Command: s n, 9c) 68. [Screen Share Lock] (Command: s n, a0) Sets UPnP.mode. Sets Screen Share Lock. Transmission Transmission (s)(n)( )(Set ID)( )(9)(c)( )(Data)(Cr) (s)(n)( )(Set ID)( )(a)(0)( )(Data)(Cr) Data 00: [Off] Data 00: Screen Share Unlock 01: [On] 01: Screen Share Lock 02: Screen Share Lock (PIN)

  • Page 131: Booting Logo Image] S N, A3

    70. [Booting Logo Image] (Command: s n, a3) 74. [Audio Out] (Command: s n, aa) Sets Booting Logo Image. Sets Audio Out to Off/Variable/Fixed. Transmission Transmission (s)(n)( )(Set ID)( )(a)(3)( )(Data)(Cr) (s)(n)( )(Set ID)( )(a)(a)( )(Data)(Cr) Data 00: [Off] Data 00: [Off] 01: [On] 01: [Variable]...
  • Page 132 77. [Timer Power On] Scheduling (Command: f d) 78. [Timer Power Off] Scheduling (Command: f e) Sets On Timer settings. Sets Off Timer settings. Depending on the model, the number of schedules for Timer Depending on the model, the number of schedules for Timer Power On can be either 16 or 21.

  • Page 133: Data (Hexadecimal)

    79. LCIN008 Control (Command: s n, b8) 82. Change SetID (Command: j x) It controls the LCIN008 device. Changes and checks SetID. Read only Transmission (s)(n)( )(Set ID)( )(b)(8)( )(Data1)(Data2)(Cr) Transmission (j)(x)( )(Set ID)( )(Data)(Cr) Data 1 00: LCIN008 Power 01: LCIN008 Brightness Data FF: Check the value of SetID Data 2...
  • Page 134 85. [UHD Deep Color] (Command: s n, af) 88. [PC Power Control] (Command: s n, 8b) It sets the UHD Deep Color mode for each input. It sets the PC Power Control mode. Transmission Transmission (s)(n)( )(Set ID)( )(a)(f)( )(Data1)( )(Data2)(Cr) (s)(n)( )(Set ID)( )(8)(b)( )(Data)(Cr) Data 1 90: HDMI1 Data...
  • Page 135 91. [HDR Picture Mode] (Command: s n, c4) 94. [Color Calibration] (Command: s n, d6) Selects a HDR Picture Mode. Selects Colour Calibration. Transmission Transmission (s)(n)( )(Set ID)( )(c)(4)( )(Data)(Cr) (s)(n)( )(Set ID)( )(d)(6)( )(Data)(Cr) Data 00: Mall/QSR Data 00: Off 01: General 01: On 02: Gov./Corp.

  • Page 136: Troubleshooting

    TROUBLESHOOTING Please check the list below when you experience the following symptoms during use of the product. It may not be a failure. Information on customer service for product problems is available in [General] [System Information] on the projector. Troubleshooting Power/Remote Issues Please check the list below when you experience the following symptoms during use of the product.

  • Page 137: Troubleshooting Screen Issues

    Troubleshooting Screen Issues Please check the list below when you experience the following symptoms during use of the product. It may not be a failure. It says there is no signal on the screen. • Check if the cable connected to the external device is properly connected to the projector. •...

  • Page 138: Troubleshooting Sound Issues

    Troubleshooting Sound Issues Please check the list below when you experience the following symptoms during use of the product. It may not be a failure. The screen is fine, but it does not play any sound. • See if the audio cable is connected properly. •...

  • Page 139: Troubleshooting Pc Connection Issues

    The sound does not play when the PC is connected with an HDMI cable. ® • In PC settings, set Control Panel Sound Play LG projector as the default device. • Consult your manufacturer on whether your graphics card supports HDMI audio output.

  • Page 140: Troubleshooting Movie Playback Issues

    Troubleshooting Movie Playback Issues Please check the list below when you experience the following symptoms during use of the product. It may not be a failure. For more information about supported files, see “Supported Photo & Video Files” . I cannot find a file in the [Player]. •...

  • Page 141: Troubleshooting Network Connection Issues

    Troubleshooting Network Connection Issues Please check the list below when you experience the following symptoms during use of the product. It may not be a failure. Before connecting to a wireless network, check the name and password of the Wi-Fi device to connect. You can check the network connection status as shown below.
  • Page 142 When X appears next to Gateway • Check the AP (Router) or consult your Internet service provider. • Unplug the power cord of the AP (Router), Cable Modem, wait 10 seconds. Reapply power. • Initialize (Reset) on the AP (Router) or Cable Modem. •...

This manual is also suitable for:

Probeam bu70qga-glProbeam bu70qga

Table of Contents