Powering On/Off The Projector; Powering On The Projector - LG BS275 Manual

Turn on the projector
first and then the signal
sources.

Powering On/Off the Projector

Powering On the Projector

1. Ensure that the power cable and signal cable are securely
connected. The POWER LED will turn amber.
2. Remove the lens cap. 
3. Turn on the lamp by pressing "POWER" on the control
panel or the remote control.  The POWER LED will flash
green.
The startup screen will display in approximately 5 seconds.
When disappear startup screen, the POWER LED will turn
green.
4. Turn on your source (computer, notebook, video player,
etc.) The projector will detect your source automatically.
 I f you connect multiple sources at the same time, use the
"SOURCE" on the remote control or use "RGB", "S-video",
"Video" on the remote control to switch inputs.
Lens Cap
1
Installation
POWER
2
OR
15
English
English