Appendices; Troubleshooting - LG BS275 Manual

Appendices

Troubleshooting

Problem: No image appears on screen





Problem: Partial, scrolling or incorrectly displayed image


34
English
All manuals and user guides at all-guides.com
If you experience trouble with the projector, refer to
the following information. If the problem persists,
please contact your local dealer or service center.
Ensure all the cables and power connections are correctly and
securely connected as described in the "Installation" section.
Ensure the pins of connectors are not crooked or broken.
Check if the projection lamp has been securely installed. Please
refer to the "Replacing the lamp" section.
Make sure you have removed the lens cap and the projector is
switched on.
Ensure that the "AV-Mute" feature is not turned on.
Press "Auto" on the remote control or on the control panel.
If you are using a PC:
For Windows 95, 98, 2000, XP:
1. From the "My Computer" icon, open the "Control Panel" folder,
and double click the "Display" icon.
2. Select the "Settings" tab
3. Click on the "Advanced Properties".
For Windows Vista:
1. From the "My Computer" icon, open the "Control Panel" folder,
and double click the "Appearance and Personalization"
2. Select "Personalization"
3. Click "Adjust screen resolution" to display "Display Settings".
Click on the "Advanced Settings".
If the projector is still not projecting the whole image, you will
also need to change the monitor display you are using. Refer to
the following steps.