Enable NICAM sound
NICAM is a digital sound transmission system. It
transmits either one stereo channel or two
separate mono channels.
1
Press 设定.
2
Select [ Tuner ] > [ Manage Presets ],
then press OK.
3
Select a channel, then press
4
Select [ NICAM ], then press OK
repeatedly to toggle between:
[ On ]
Enable NICAM mode.
[ Off ]
Disable NICAM mode.
5
To exit, press 设定.
Rename a channel
1
Press 设定.
2
Select [ Tuner ] > [ Manage Presets ],
then press OK.
3
Select a channel, then press
4
Select [ Rename ], then press OK.
The keyboard screen is displayed.
EN
44
1_dvdr3600_93_UM_En_28951.indd 44
1_dvdr3600_93_UM_En_28951.indd 44
5
Select the key to enter, then press OK.
•
Option
[ Space ]
⌫
[ Confi rm ]
.
•
•
•
6
To confi rm, select [ Confi rm ] and press
OK.
Re-install all channels
•
All channels stored on the recorder will be reset.
1
Press 设定.
2
.
Select [ Tuner ] > [ Auto Search ], then
press OK.
•
3
To exit, press 设定.
Use the following options to edit.
Action
Insert a space between the
characters.
Remove the character to the
left of the cursor.
Confi rm all changes and exit
the keyboard screen.
Use
keys to highlight the
respective option.
Press í or ë repeatedly to toggle
between upper, lower case characters
or symbols.
To cancel the changes, press 返回.
Note
Channel tuning begins.
To cancel during channel tuning, press
OK.
2008-02-18 9:58:13 AM
2008-02-18 9:58:13 AM