Connect to an analogue camcorder
OUTPUT
VIDEO
AUDIO
COMPONENT VIDEO
CVBS
L
Y
PB
TV-OUT
ANTENNA-IN
HDMI OUT
S-VIDEO
R
COAXIAL
P R
COAXIAL
P R
S-VIDEO
(DIGITAL AUDIO)
R
(DIGITAL AUDIO)
1
Connect a video cable (yellow - not
supplied) from the VIDEO IN CVBS
socket and to the S-VHS or video output
socket on the camcorder.
2
Connect the audio cable (not supplied)
from the AUDIO IN sockets and to the
audio output sockets on the camcorder.
•
To view the video input, press 信号源
repeatedly until 'EXT1' is displayed.
Tip
•
To record from this device, see chapter 'Record from
other devices'.
EN
18
1_dvdr3600_93_UM_En_28951.indd 18
1_dvdr3600_93_UM_En_28951.indd 18
EXT 1
AUDIO IN
VIDEO IN
L
CVBS
R
S-VIDEO
R
S-VIDEO
EXT 1
AUDIO IN
VIDEO IN
L
CVBS
R
AUDIO OUT
VIDEO OUT
Connect to a USB device or digital
camera
1
Flip down the cover on the right hand
corner of this recorder.
2
Connect a USB device or digital camera to
the
USB socket.
Note
•
The USB socket does not support a USB hub device.
Only digital cameras which support USB Mass
Storage Device class standard are supported.
Tips
•
You can copy fi les from the recorder to your USB
device.
•
To view the contents of the connected USB device,
see chapter 'Play – Play from USB'.
2008-02-18 9:57:55 AM
2008-02-18 9:57:55 AM