Philips DVDR3600/93 Manual page 17

Connect to VCR or similar device
You can record from a video tape to a
recordable DVD or use the VCR for playback
when the recorder is turned off.
OUTPUT
VIDEO AUDIO COMPONENT VIDEO
CVBS L Y PB
TV-OUT ANTENNA-IN
HDMI OUT
COAXIAL P R
S-VIDEO R COAXIAL P R R
R
S-VIDEO (DIGITAL AUDIO)
(DIGITAL AUDIO)
EXT 1
AUDIO IN VIDEO IN
L
R S-VIDEO
VHF/UHF
OUT
RF IN
VIDEO
OUT
L
AUDIO
VHF/UHF
R
RF OUT
1
Connect a composite video cable (yellow
end) from the VIDEO IN CVBS socket
to the video output socket on the device.
2
Connect an audio cable (red/white ends)
from the AUDIO IN sockets to the
matching audio output socket on the
device.
• To view the video input, press 信号源
repeatedly until 'EXT1' is displayed.
Notes
•
Your new recorder replaces the VCR for all your
recording needs. Just unplug all the connections to
your VCR.
•
Most commercial video tapes and DVDs are copy-
protected and therefore cannot be recorded.
1_dvdr3600_93_UM_En_28951.indd 17 1_dvdr3600_93_UM_En_28951.indd 17
EXT 1
AUDIO IN
VIDEO IN
L CVBS
S-VIDEO
R S-VIDEO
CVBS
OUT
VIDEO
OUT
L
AUDIO
R
IN
VIDEO
IN
L
AUDIO
R
Connect to digital video/digital 8
camcorder
DV OUT
1
Flip down the cover on the right hand
corner of this recorder.
2
Connect an i.LINK 4-pin cable (not
supplied) from the DV-IN socket on the
front panel to the DV OUT socket on the
camcorder.
• To view the video input, press 信号源
repeatedly until 'DV' is displayed.
Note
•
It is not possible to record or copy the titles from this
recorder to your camcorder.
Tip
•
This connection provides the best picture quality.
DV-IN
EN
17
2008-02-18 9:57:55 AM 2008-02-18 9:57:55 AM