Table of Contents
Advertisement
Enhancing your system
The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
VCR, DVD, etc.
White
Red White
RCA lead (not supplied)
Auto power on function:
When you press any of the following buttons, the unit turns on.
l VIDEO/AUX button (main unit and remote control): The unit turns
on and the "VIDEO" function is activated.
l
/
button (main unit and remote control): The unit turns on and
playback of the last function starts (CD, TAPE, TUNER, VIDEO/
AUX).
n Listening to the playback sounds from VCR,
DVD, etc.
1
Use a connection lead to connect the VCR, DVD, etc. to the
VIDEO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
To the line
2
Press the ON/STAND-BY button to turn the power on.
output sockets
3
Press the VIDEO/AUX button.
Red
4
Play the connected equipment.
Note:
To prevent noise interference, place this unit away from a television.
n To record on a tape
1
Insert a cassette in the TAPE 2 cassette compartment.
2
Press the VIDEO/AUX button.
3
Press the REC PAUSE (TAPE-2
4
Press the
/
button.
5
Play the VCR, DVD, etc.
n Headphones
l Before plugging in or unplugging the headphones, reduce the
volume.
l Be sure your headphones have a 3.5 mm (1/8") diameter plug and
are between 16 ohms and 50 ohms impedance. The recommend-
ed impedance is 32 ohms.
l Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME buttons.
10/3/05
MPX100EE_1.fm
CD-MPX100E
) button.
31
TINSEA093AWZZ
Advertisement
Table of Contents
