Reset Menu - Epson EB-G7905UNL User Manual

List of Functions
Submenu
Status
Serial Number
Lens Type
Event ID
HDBaseT Sig-
nal Level
Lamp Info Lamp Hours
Version Main
Video2
Status Information
* The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours
and above is displayed as "10H", "11H", and so on.
Function
This is information about errors that have
occurred on the projector.
This information may be needed if service
is required.
Displays the projector's serial number.
Displays the model number of your lens.
When problems occur when the projector
and computer are connected through the
network, information on the problem is
displayed using an Event ID. See the
following page for information on
interpreting the Event ID.
s "About Event ID" p.187
You can display the image signal
information from the HDBaseT port.
You can display the cumulative lamp
*
operating time .
When the lamp replacement time is
reached, the characters are displayed in
yellow.
Displays the projector's firmware version
information.
Displays the projector's status.
s "Reading the Status Information"
p.170

Reset Menu

Submenu
Reset Lamp Clears the cumulative lamp hours use time. Reset when you
Hours replace the lamp.
Resets all names and settings saved in Memory, Lens Position,
Reset All Memo-
and Geometric Correction.
ries
s "Memory Function"
Reset All Config You can reset all items in the Configuration menu to their default
settings.
The following items are not reset to their defaults: Input Signal,
Memory, User's Logo, all items for Network menus, Lamp
Hours, Language, Date & Time, Panel Alignment, Color
Uniformity, and Color Matching.
153
Function
p.121