Table of Contents
Advertisement
Adjusting Projected Images
Adjust using the gamma adjustment graph
Select a tone point on the graph and make adjustments.
a
Press the [Menu] button while projecting.
b
Select Advanced from Image, and then press the [
c
Select Gamma, and then press the [
d
Select Customized, and confirm using the [
e
Select Adjust it from the graph, and confirm using the [
button.
] button.
] button.
] button.
Frame Interpolation
]
f
Use the [ ][ ] buttons to select the tone that you want to
change, and then use the [
adjustments. When you have finished making changes, confirm by
using the [
] button.
If you use the [ ][ ] buttons to select the tone that you want to
change, the image flashes and you can check the tone area of the
adjustment target.
g
When Do you want to continue adjusting the setting? is
displayed, select Yes or No.
To adjust another tone, select Yes, and repeat the procedure from
step 6.
The current and previous frames are used to create intermediate frames,
interpolating to produce smooth-moving images. You can resolve clumsy-
moving images, such as frame skipping when projecting a fast moving
image.
][
] buttons to make the
94
Advertisement
Table of Contents
