Other Features; Set The Sleep Timer; Set The Alarm Timer; Adjust The Volume - Philips OTT2000/05 User Manual

7 Other features

Set the sleep timer

This micro sound system can automatically
switch to standby after a set period of time.
• When the micro system is turned on, press
SLEEP/TIMER repeatedly to select a set
period of time (in minutes).
• [SLEEP -- 90]
• [SLEEP -- 75]
• [SLEEP -- 60]
• [SLEEP -- 45]
• [SLEEP -- 30]
• [SLEEP -- 15]
• [OFF]
» When sleep timer is activated, [SLEEP]
is displayed.
To deactivate sleep timer
• Press SLEEP/TIMER repeatedly until
[SLEEP OFF] (sleep off) is displayed.
» When sleep timer is deactivated,
[SLEEP] disappears.

Set the alarm timer

This micro system can be used as an alarm
clock. The disc, USB, or tuner is activated to play
at a preset time.
1
Press to switch the unit to standby
mode.
2
Make sure that you have set the clock
correctly.
3
Press and hold SLEEP/TIMER.
» A prompt to select the source is
displayed.
4
Press SOURCE repeatedly to select a
source: CD, USB, or FM.
5
Press SLEEP/TIMER to confirm.
» The hour digits begin to blink.
6
Press / to set the hour.
7
Press SLEEP/TIMER to confirm.
» The minute digits begin to blink.
8
Press / to set the minute.
9
Press SLEEP/TIMER to confirm.
» The timer is set and activated.
Activate and deactivate the alarm
timer
1
Press to switch the micro system to
standby mode.
2
Press SLEEP/TIMER repeatedly to activate
or deactivate the timer.
» If the timer is activated, the display
shows .
» If the timer is deactivated,
shown on the display.
Note
•
If DISC/USB source is selected and the track cannot be
played, tuner is automatically activated.
•
The micro sound system automatically switches to
standby mode if no operation is performed within 30
minutes after the alarm source is activated.

Adjust the volume

Turn the VOLUME knob to increase/decrease
volume.
is not
EN 15