Play vinyl record
Caution
•
Remove the stylus protector before use.
•
Place one vinyl record on the platter at a time.
•
Keep 15 cm at least between the device and other
objects.
1
Press SOURCE repeatedly to select
PHONO/AUX source.
2
Select the correct speed with the speed
selector.
• You can select speed 33 or speed 45
according to different vinyl type.
3
Place the vinyl record on the turntable
platter.
4
Lift the tone arm carefully and move it
towards the record.
» The turntable platter starts rotating
automatically.
5
Gently lower the tone arm onto the edge
of the record to begin playback from the
beginning.
» Playback starts.
6
Adjust the volume to the desired level.
• If AUTO STOP is set to ON, the
platter stops rotating automatically
after playback finishes.
7
Put the tone arm securely back on the arm
rest.
Note
•
The micro system automatically switches to AUX
source when there is an external device is connected
through the AUDIO IN socket.
Play from USB
Note
•
Make sure that the USB storage device contains
playable audio content.
•
Only MP3 files with bit rates from 32 kbps to 320 kbps
are supported.
•
The USB socket does not support connections
with USB extension cables and is not designed for
communicate directly with a computer.
1
Push down the USB protective cover and
then insert a USB storage device into the
socket.
2
Press SOURCE repeatedly to select USB
source.
» Play starts automatically. If not, press
.
• To select a folder, press
• To select an audio file, press
/ .
/
.
EN
11