Table of Contents
Advertisement
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Connect the AC power cord to the AC
MAIN~ socket and then to the wall outlet.
Prepare remote control
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
For first-time use:
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert one CR2032 battery with correct
polarity (+/-) as indicated.
EN
8
3
Close the battery compartment.
Note
•
Before pressing any function button on the remote
control, first select the source with the remote control
and not the main unit.
•
If the the remote control will not be used for an
extended period of time, remove the battery.
Turn on
Press .
» The product switches to the last
selected source.
• To switch the product to standby
mode, press
again.
Advertisement
Table of Contents
