Program Radio Stations Manually; Select Stereo/Mono Broadcast; Listen To An External Device - Philips OTT2000/05 User Manual

Program radio stations
manually
1
Press / to tune to a radio station.
2
Press CLOCK/PROG to activate the
programming.
3
Press / to allocate a number to this
radio station.
4
Press CLOCK/PROG to confirm.
» The radio station is stored with the
selected sequence number.
5
Repeat steps 1-4 to program more radio
stations.
Note
•
If a radio station is stored over the sequence number
of a previously saved station, the earlier station will be
overwritten.

Select stereo/mono broadcast

To improve the reception of stations with weak
signals, monaural sound should be selected.
In tuner source, press FM/ST/MO to select
•
a setting:
• [STEREO]: stereo broadcast.
• [MONO]: monaural broadcast.
EN
14
6 Listen to an
external device
You can also listen to an external audio device,
for example, MP3 player, through this product.
1
Turn the SOURCE knob to select
PHONO/AUX mode.
2
Connect the audio in cable to
• the AUDIO IN socket on the front
panel of this product, and
• the headphone jack on the external
device.
3
Play the external device (refer to its user
manual).