Table of Contents
Advertisement
ENGLISH
70
Machine actions
Coff ee is too weak.
(see note)
Coff ee is brewed slowly.
(see note)
Coff ee leaks out of the dispens-
ing spout.
Froth milk is too cold.
The milk is not frothed.
The milk does not come out.
Only steam comes out of the
carafe.
Causes
This might occur when the machine
is automatically adjusting the dose.
The coff ee grind is too fi ne.
The circuit is not primed.
The brew group is dirty.
The dispensing spout is clogged.
The cups are cold.
The milk carafe is dirty or not
inserted correctly.
The milk carafe dispenser has not
been removed correctly.
The milk carafe is not fully
assembled.
The milk carafe dispenser has not
been removed completely.
Note:
* These problems can be considered normal if the coff ee blend has been
changed or if the machine has just been installed. In this case wait until the
machine performs a self-adjusting operation as described in the "Saeco
Adapting System" chapter.
Solutions
Brew a few cups of coff ee as described
in the "Saeco Adapting System" chapter.
Change coff ee blend or adjust the
grind as explained in chapter "Adjust-
ing the Ceramic Coff ee Grinder".
Prime the circuit (see the "Using the
Machine for the First Time" chapter).
Clean the brew group (see the "Weekly
Cleaning of the Brew Group" chapter).
Clean the dispensing spout and its
holes.
Preheat the cups with hot water.
Clean the carafe and insert it correctly.
Check that the milk dispenser has been
removed correctly.
Make sure that all components have
been correctly assembled.
Remove the milk carafe dispenser
completely until you hear the CLICK!
Advertisement
Table of Contents
