Table of Contents
Advertisement
ENGLISH
60
18
Press the "
" button to start the rinse cycle.
Note:
The rinse cycle may be paused by pressing the "
cycle, press the "
" button again. This allows you to empty the container or
to leave the machine unattended for a short time.
19
When this icon is displayed, the water tank is empty. Repeat steps 14-
17. When the machine shows this icon again, go to step 20.
20
When the water tank is empty, remove it, rinse it and fi ll it up to the
MAX level with fresh water. Place it back into the machine.
21
Empty the container and place it back under the dispensing spout.
Note:
The circuit must be cleaned with a preset quantity of water. If the water tank
is not fi lled up to MAX level, the machine might require three or more refi lls
for rinsing.
22
When the amount of water needed for the rinse cycle has been
completely dispensed, this icon on the side is displayed. Press the "
button to quit the descaling cycle.
23
The machine automatically primes the circuit.
24
The machine now carries out the warm-up and automatic rinse cycle to
prepare for product brewing.
25
Disassemble and wash the milk carafe as described in the "Weekly
Cleaning of the Milk Carafe" chapter.
" button. To resume the
"
Advertisement
Table of Contents
