Table of Contents
Advertisement
1
Remove the small white fi lter from the water tank and store it in a dry
place.
2
Remove the "INTENZA+" water fi lter from its packaging, immerse it ver-
tically (with the opening positioned upwards) in cold water and gently
press the sides so as to let the air bubbles out.
3
Set the "INTENZA+" water fi lter according to the measurements per-
formed (see previous chapter) and indicated on the base of the fi lter:
A = soft water – equals 1 or 2 on the test strip
B = hard water (standard) – equals 3 on the test strip
C = very hard water – equals 4 on the test strip
4
Put the "INTENZA+" water fi lter into the empty water tank. Press it
down until it cannot move any further.
5
Fill the water tank with fresh water and reinsert it into the machine.
6
Dispense all the water in the tank by using the hot water function (see
the "Dispensing Hot Water" chapter).
7
Fill the water tank again.
ENGLISH
15
15
Advertisement
Table of Contents
