Smeg SFA4920MCB Manual page 21

Pre-heating stage
With the combination and traditional
functions cooking is preceded by a
preheating stage allowing the oven to
reach the cooking temperature more
quickly.
This stage is indicated by the flashing of
the temperature level reached indicator.
At the end of the preheating stage the
temperature level reached indicator
remains on and a buzzer sounds to
indicate that food can be placed into
the oven. In some combined functions only,
the appliance now waits for confirmation to
proceed with cooking; introduce the food
and press the function knob to continue.
Cooking can be stopped at any
time by pressing and holding the
function knob down for at least 3
seconds.
Use
Timer (only for traditional cooking)
This function only activates the
buzzer, without stopping cooking.
The timer can be activated both
during cooking and when the
appliance is in standby.
1. Press the temperature knob once (twice if
cooking is already in progress). The
display shows
indicator light flashes.
2. Turn the knob to set the cooking time
(from 1 minute up to 4 hours). After a few
seconds, the
flashing and the countdown starts.
3. Select the required cooking function and
wait for the buzzer to sound, indicating
that the cooking time is over. The
indicator light flashes.
4. Turn the knob to select an additional
timer. Or else press the temperature knob
to stop the buzzer.
and the
indicator light stops
23