Wps - TP-Link TL-WR945N User Manual

Chapter 5
• Channel - The current wireless channel in use.
• Mode - The current wireless mode which the router works on.
• Channel Width
• MAC Address
• Traffic Statistics - The router's traffic statistics.
• Received (Bytes)
• Received (Packets)
• Sent (Bytes)
• Sent (Packets)
• System Up Time - The length of the time since the router was last powered on or
reset.
Click Refresh to get the latest status and settings of the router.
5. 2.

WPS

WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network.
This section will guide you to add a new wireless device to your router's network quickly
via WPS.
Note:
The WPS function cannot be configured if the wireless function of the router is disabled. Please make sure the wireless
function is enabled before configuration.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to WPS.
3. Follow one of the following three methods to connect your client device to the router's Wi-Fi
network.
Method ONE: Press the WPS Button on Your Client Device
1. Keep the WPS Status as
- The current wireless channel width in use.
- The physical address of the router.
- Traffic in bytes received from the WAN port.
- Traffic in packets received from the WAN port.
- Traffic in bytes sent out from the WAN port.
- Traffic in packets sent out from the WAN port.
Enabled and click Add Device.
72