Table of Contents
Advertisement
4 ) Go to
Advanced
• Use another web browser or computer to log in again.
• Reset the router to factory default settings and try again. If the login still fails, please
contact the technical support.
Note: You'll need to reconfigure the router to surf the Internet once the router is reset.
Q4. How to use the WDS Bridging function to extend my wireless
network?
For
example, my house covers a large area. The wireless coverage of the router I'm
using (the root router) is limited. I want to use an extended router to extend the wireless
network of the root router.
Note:
•
WDS bridging only requires configuration on the extended router.
1. Visit http://tplinkwifi.net, and log in to with the username and password you set for
the router.
2. Configure the IP address of the router:
1 ) Go to
Network
in the same subnet with the root router; (For example, the IP address of the
>
Restore advanced
> LAN, configure the IP address of the extended router to be
settings, and click
OK
to save the settings.
95
Advertisement
Table of Contents
