Table of Contents
Advertisement
Chapter 4
•
Primary IPv6 DNS
notation provided by your ISP.
•
Secondary IPv6 DNS
hexadecimal notation provided by your ISP.
•
Use the following IPv6 DNS Servers
addresses, select
IPv6 DNS
and
•
Connection Mode
•
Alway On
•
Connect Manual
•
Connect
- Click
•
Disconnect
Tunnel 6to4
•
Address/Subnet Mask/Default Gateway
default gateway assigned, in dotted-decimal notation.
•
Tunnel Address
IPv6 network.
•
MTU Size
- The normal MTU (Maximum Transmission Unit) value for most
Ethernet networks is 1480 Bytes. For some ISPs, you may need to modify the
MTU. But this is rarely required, and should not be done unless you are sure it is
necessary for your ISP connection.
•
Use the following IPv6 DNS Servers -
addresses, select
IPv6 DNS
and
servers will be assigned from ISP dynamically.
•
Primary IPv6 DNS
notation provided by your ISP.
- Enter the DNS IPv6 address in colon-hexadecimal
- Enter another DNS IPv6 address in colon-
Use the following IPv6 DNS Servers
Secondary IPv6 DNS
- The way to connect the ISP.
- Connect automatically.
- Connect by the user manually.
Connect
to connect immediately.
- Click
Disconnect
to disconnect immediately.
- The 6to4 tunnel address created by the device to access the
Use the following IPv6 DNS Servers
Secondary IPv6 DNS
- Enter the DNS IPv6 address in colon-hexadecimal
- If your ISP gives you one or two DNS IPv6
in the corresponding fields.
- The IPv4 address/ subnet mask/
If your ISP gives you one or two DNS IPv6
into the correct fields. Otherwise, the DNS
and enter the
Primary
and enter the
Primary
61
Advertisement
Table of Contents
