Control The Led - TP-Link TL-WR945N User Manual

Chapter 5
¾ To set time manually:
3. Select your local time
4. Enter the Date in Month/Day/Year format.
5. Enter the Time in Hour/Minute/Second format.
6. Click Save.
¾ To set time automatically:
7. Select your local time
8. Enter the address or domain of the
9. Click Get GMT to get time from the Internet if you have connected to the Internet.
¾ To set Daylight Saving Time:
1. Select Enable DaylightSaving.
2. Select the start time from the drop-down list in the
3. Select the end time from the drop-down list in the
4. Click Save.
Note:
This setting will be used for some time-based functions such as firewall. You must specify your time zone once you log
in to the router successfully; otherwise, time-based functions will not take effect.
5. 7. 2.

Control the LED

The router's LEDs indicate router's activities and status. You can turn on or turn off the
LEDs from the web management page.
To turn off LEDs during Night Mode Period:
1 ) Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2 ) Go to System Tools
3 ) Check the box for
4 ) Specify a time period in the
during this period.
5 ) Click Save.
zone.
zone.
NTP Server I
> LED Control.
Enable Night Mode.
LED Off Time
or NTP Server II.
Start field.
End field.
as needed, and the LED will be off
85