The Back Panel - TP-Link TL-WR945N User Manual

Chapter 1
1. 2. 2.

The Back Panel

The following parts (view from left to right) are located on the rear panel.
Item
ON/OFF
Power Port
Wi-Fi/WPS button
Reset Button
WAN Port
LAN Ports (1/2/3/4)
Antennas
For turning on or off the router.
For connecting the router to a power socket via the provided power adapter.
To enable the wireless function, press and hold this button for about 6 seconds.
To enable the WPS function, press and hold this button for about 3 seconds. If
you have a WPS-supported device, you can press this button to quickly establish
connection between the router and your device and automatically configure wireless
security for your wireless network.
Use a pin to press and hold this button until the LED blinks to reset the router to its
factory default settings.
For connecting to a DSL/Cable modem, or an Ethernet port.
For connecting your PCs or other wired network devices to the router.
Used for wireless operation and data transmitting. Upright them for the best Wi-Fi
performance.
Description
4