Mazda 2004 RX-8 Owner's Manual page 37

J60E_8R65-EA-03C_Edition2.book Page 26 Saturday, April 26, 2003 1:48 PM
Essential Safety Equipment
Child Restraint
M LATCH Child-Restraint System
Installation Procedure (Rear
Seats)
1. Expand the open seams on the rear of
the seat bottom slightly to verify the
locations of the LATCH lower anchors.
Marking
LATCH
lower anchor
NOTE
The markings above the LATCH lower
anchors indicate the locations of
LATCH lower anchors for the
attachment of a child-restraint system.
2. Secure the child-restraint system using
BOTH LATCH lower anchors,
following the child-restraint system
manufacturer's instruction.
2-26
Form No. 8R65-EA-03C
3. If your child-restraint system came
equipped with a tether, that probably
means it is very important to properly
secure the tether for child safety, please
carefully follow the child-restraint
system manufacturer's instructions
when installing tethers.
Anchor bracket location
For rear right seat
Open
Cover
Tether strap position
WARNING
Child-Restraint Tether Usage:
Using the tether or tether anchor to
secure anything but a child-restraint
system is dangerous. This could
weaken or damage the tether or tether
anchor and result in injury. Use the
tether and tether anchor only for a
child-restraint system.
For rear left seat
Tether strap
Anchor
bracket