Table of Contents
Advertisement
J60E_8R65-EA-03C_Edition2.book Page 22 Saturday, April 26, 2003 1:48 PM
Interior Comfort
Audio System
M Operating the Radio
Seek
tuning
button
Manual tuning dial/
Auto memory button
Radio ON
Press a band selector button (
to turn the radio on.
Band selection
Choose AM by pressing the AM button
(
) and FM by pressing the FM1/2
button (
).
The selected mode will be indicated. If
FM stereo is being received, "ST" will be
displayed.
NOTE
If the FM broadcast signal becomes
weak, reception automatically changes
from STEREO to MONO for reduced
noise, and the "ST" indicator will go
out.
6-22
Form No. 8R65-EA-03C
Band selector buttons
Channel preset buttons
Tuning
,
)
The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
on preset channels.
NOTE
If the power supply is interrupted (fuse
blows or the battery is disconnected),
the preset channels will be canceled.
Scan button
Advertisement
Chapters
Table of Contents
