Mazda 2004 RX-8 Owner's Manual page 213

J60E_8R65-EA-03C_Edition2.book Page 14 Saturday, April 26, 2003 1:48 PM
In Case of an Emergency
Flat Tire
NOTE
When blocking a tire, use a rock or
wood block of sufficient size to hold
the tire in place.
M Removing the Tire
1. Loosen the lug nuts by turning them
counterclockwise one turn each, but
don't remove any until the tire has been
raised off the ground.
2. Place the jack under the jacking
position closest to the tire being
changed.
7-14
Form No. 8R65-EA-03C
3. Insert the jack handle into the jack.
Jacking position
WARNING
Incorrect Jacking Position:
Attempting to jack the vehicle in
positions other than those
recommended in this manual is
dangerous. The vehicle could slip off
the jack and seriously injure or even
kill someone. Use only the front and
rear jacking positions recommended
in this manual.
Improper Jack:
Using a jack that isn't designed for
your Mazda is dangerous. The vehicle
could slip off the jack and seriously
injure someone. Use only the jack
provided with your Mazda.
Placing Objects Under the Jack:
Jacking the vehicle with an object
under the jack is dangerous. The jack
could slip and someone could be
seriously injured by the jack or the
falling vehicle. Never place objects
under the jack.