J60E_8R65-EA-03C_Edition2.book Page 5 Saturday, April 26, 2003 1:48 PM
(Electrically operated seats)
Front height adjustment
To adjust the front height of the seat-
bottom, raise or lower the front of the
slide lifter switch on the left side of the
seat.
Switch
Rear height adjustment
Raise or lower the back of the switch to
adjust the rear height of the seat-bottom.
Switch
Form No. 8R65-EA-03C
Essential Safety Equipment
M Lumbar Support Adjustment
(Driver's Seat)*
The amount of lumbar support can be
adjusted by pressing the switch.
To increase the seat firmness, press and
hold the front part of the switch to the
desired position, then release it.
Press the rear part of the switch to
increase softness.
Switch
*Some models.
Seats
2-5