Cleaning The Ice Maker - Hitachi R-SF6800Z Instructions For Use Manual

HOW TO MAINTAIN THE AUTOMATIC ICE MAKER
HOW TO MAINTAIN THE AUTOMATIC ICE MAKER

Cleaning the Ice Maker

製冰機清潔
Ice tray and water supply line can be washed.
製冰盤及給水路可自動清洗。
1
Move ice to other case and move it to the freezer
compartment because water pours into the ice case.
因為製冰盒內會流水出來，所以將冰移放到別
的容器再放入冷凍室。
Ice Compartment
製冰室
3
Touch the Ice Making button for more than 5 seconds.
按住 鍵5秒以上。
Three displays of Large/Normal/Stop flash, and
buzzer sounds and "Cleaning the Ice Maker" starts.
大顆・標準・停止的3個顯示閃爍、蜂鳴器響，
「製冰機清潔」開始。
For about 3 minutes, three displays flash and
buzzer sounds.
※Buzzer sounds even after stopping the Door Alarm.
"Cleaning the Ice Maker" is performed while three
displays flash.
大約3分鐘以內，3個顯示閃爍、蜂鳴器一直響。
※ 關了箱門警報器，蜂鳴器仍響。
顯示閃爍的時候，是在進行「製冰機清潔」。
0
__R-SF6800Z.indd 40
● When using for the first time
● When not used for more than one week
Freezer Compartment
冷凍室
Freezer Compartment
冷凍室
Touch this button for more than 5seconds
連續按5秒
About 5
seconds
約5秒
自動製冰機的保養 自動製冰機的保養
自動製冰機的保養
● 初次 使用 時
● 一個 星期 以上 沒有使 用時
2
Add water until water level reaches to the "Container-full
line" and set the water supply container.
加水到滿水綫、安裝。
Container-full line
滿水綫
Push it in beyond the "Container set position" line
without inclining it so that water in the water supply
container does not spill out.
小心不要倒灑給水槽的水，不要傾斜水槽、筆直地
插入到超過水槽安裝位置的綫位。
4
When buzzer and three displays end after 3 minutes,
remove ice and water in the ice case and wipe it.
約3分鐘之後，蜂鳴與顯示的閃爍停止以後，
取去製冰盒內的冰及水、擦乾淨。
(Make sure that water does not spill out when
removing the case.)
（卸取盒子時，請注意不要倒灑水。）
Return the ice temporarily moved to other freezer
compartment into the ice case.
將臨時移放到其他冷凍室的冰放回製冰盒裏。
Water remains in the water supply container, but
there is no problem with using.
給 水槽 裏剩 有水 ，可 以直接 繼續 用。
Container set position
水槽安裝位置
2009/10/26 11:17:12
給
Re
將
Wa
A
1
●