Table of Contents
Advertisement
Turn the power off before performing wiring
•
This may result in electric shock, or result in fire from wiring shorts or incorrect
wiring.
Only use mounting brackets made for the unit
•
Serious damage and/or injury may result if the unit falls.
Do not damage coaxial cables, insert objects into the conductor, or
connect coaxial cables with incomplete relays
•
If water or other objects enter the conductor, or coaxial cables with incomplete
relays are connected, it may result in electric shock or fire. Disconnect the AC
cord and contact an authorized service center if there is any damage to the coaxial
cables.
Do not damage existing wires or pipes when making holes for mounting
or wiring
•
This may result in earth leakage, electric shock, or fire.
Do not install or use the unit near medical equipment
•
High-frequency signals emitted from the unit may affect the operation of medical
equipment and cause malfunctions.
Do not expose the unit to rain or any type of moisture
•
To prevent the risk of fire or electrical shock, do not place objects such as cups
or vases near the unit. If the unit is exposed to moisture, disconnect the AC cord
and contact an authorized service center.
Do not touch the core of the coaxial cable
•
A maximum of DC 60 V is applied to the coaxial cable. This may result in electric
shock.
Do not perform wiring or installation during thunderstorms
•
This may result in electric shock or fire.
Secure screws with the specified torque
•
Serious damage and/or injury may result if the unit falls.
CAUTION
Disconnect the AC cord of the center adaptor if the unit will not be used
for long periods of time or when performing care and cleaning
•
Leaving the AC cord connected when the unit is not used for long periods of time
or when performing care and cleaning may result in earth leakage, electric shock,
or injury.
For Your Safety
Operating Instructions
5
Advertisement
Table of Contents
