Table of Contents
Advertisement
Changing the adaptor's password
You may change the adaptor's password if necessary. The password is required to
access the maintenance screen.
1. Access the maintenance screen of the adaptor.
2. Click [Option], then click the [Account] tab.
3. Enter the desired password within 6-12 characters (only A-Z, a-z, and 0-9 can be
used).
•
Passwords are case-sensitive.
•
[Space], ["], ['], [&], [<], and [>] cannot be entered.
4. Click [Set], then click [OK] when prompted.
5. Click [Restart].
•
The adaptor will restart, and the new settings will take effect. The new password
must be entered in order to access the adaptor's maintenance screen again.
IMPORTANT
•
After you have finished using the maintenance screen, restore the computer's IP
address and network settings to their original values.
•
To increase security, we recommend changing the adaptor's password.
•
Do not forget the password. If the password is forgotten, you can reset the
password to the default value (999999) by resetting the adaptor (see page 14).
If the adaptor is reset, all registration information is erased.
•
Do not disclose the password, you are responsible for managing your password.
•
The user name cannot be changed.
•
The screen shown here depicts the screen shown when accessing a camera
adaptor. The screen displayed for the center adaptor and camera adaptor is
different.
3 Adaptor Maintenance Screen
Operating Instructions
27
Advertisement
Table of Contents
