Table of Contents
Advertisement
5 Specifications
Performance Specifications
Items
Transmission Speed
(UDP)
Transmission Speed
(TCP
)
*2
Maximum
Transmission Distance
*1
This value is for transmissions between the BY-HPE11H and BY-HPE11R. The transmission speed when
using an RG-6/U coaxial cable may very depending on factors such as the coaxial cable condition and
network environment. The values shown here measured in environments not affected by cable or network
environment conditions.
*2
Measured using Linux
Maximum Transmission Distance / PoE Power Supply (when using RG-6/U
coaxial cable) Specifications
Maximum
Transmission
Distance
Power
Supplied by
PoE
*1
When connecting an IEEE802.3af (Alternative B, class0) network camera to the camera adaptor
(BY-HPE11R).
*2
When connecting a Panasonic network camera (see
http://panasonic.net/pss/security/products/coax/index.html for more information) to the camera adaptor
(BY-HPE11R).
*3
Turn the PoE switch [OFF] in this situation.
34
Operating Instructions
45 Mbps or higher (when using an RG-6/U coaxial cable at
*1
distances under 2 km)
35 Mbps or higher (when using an RG-6/U coaxial cable at
*1
distances under 2 km)
Without PoE function: 2 km
With PoE function: 500 m (when using a Panasonic network
camera) / 300 m (when using a Class0 standard network
camera)
FTP.
®
300 m
500 m
15.4 W
12.0 W
*1
Specifications
1,000 m
Cannot supply power with PoE
*2
1,500 m
2,000 m
*3
Advertisement
Table of Contents
