Table of Contents
Advertisement
4 Troubleshooting
Problem
The center adaptor's
COAXIAL indicator is
not lit.
The center adaptor's
COAXIAL indicator is lit
red.
4.2 Communication Speed Issues
Problem
When testing the
communication speed,
all the indicators are off,
or only 1 or 2 of the
indicators are lit.
30
Operating Instructions
•
The center adaptor is not receiving power.
→ Confirm that the AC cord is connected to the power outlet
and AC IN of the center adaptor (see 3.2 Connections
in the Installation Guide).
•
The coaxial cable is not connected.
→ Confirm that the coaxial is not over 2 km in length and is
connected properly (see 3.2 Connections in the
Installation Guide).
→ Confirm that there are no connection problems such as
damage or breaks in the cable.
•
The camera adaptor is not connected.
→ Connect the center and camera adaptors with a coaxial
cable (see 3.2 Connections in the Installation Guide).
•
Data cannot be sent because the center adaptor may be
malfunctioning.
→ Contact an authorized service center.
•
The communications speed may be affected due to issues
with the installation environment.
→ This is not a malfunction. Confirm that there are no
problems with using the camera or displaying images.
→ Confirm that the coaxial cable is of a suitable type and
length, and that there are no devices near the unit that
may cause strong interference.
Cause and Remedy
Cause and Remedy
Advertisement
Table of Contents
