Table of Contents
Advertisement
3.1.2 Accessing the Maintenance Screen
Follow the procedure below after you have changed the IP address of the computer.
1. Connect the adaptor (A: camera adaptor or center adaptor) and computer (C) using
a LAN cable (B). When accessing the camera adaptor, make sure it is connected
to the center adaptor with a coaxial cable, and that the center adaptor is connected
to the power outlet.
IMPORTANT
•
To display the maintenance screen of adaptors that have already been
installed or connected, directly connect each adaptor to a PC with a LAN
cable.
2. Start the computer's web browser.
•
See page 22 for information on web browsers.
3. Enter http://192.168.249.249/ in the web browser's address bar.
4. Enter the user name and password.
– Default user name: BY-HPE11
– Default password: 999999
•
The screen shown here depicts the screen shown when using Windows 7.
A
B
3 Adaptor Maintenance Screen
C
Operating Instructions
19
Advertisement
Table of Contents
