Lincoln Electric PF26 Operator's Manual page 22


Use the Set Control [11] to highlight the function
which will be assigned to the Right Button [12], for
example Crater Procedure.
Figure 41

Press the Set Control [11] to select the Assigned
Function to the Right Button [12]. The Check Mark
will also change the position.
Figure 42

Confirm the select – press the Right Button [12].

Return to the main level of the interface. If the Right
Button [12] is pressed, the Crater Interface Settings
will be shown on the display.
The Brightness Level
Enables the Brightness Level.

Adjust range: from 0 to +10.
English
Lock / Unlock
Can lock / unlock:
Icon Description
All Interface
Components
The Left [9] and / or
Right [10] Control
The Welding
Parameters Bar [27]
The Set Control [11] and
the Left [7] and the Right
[12] button
Configuration Menu
User Memory
M
To set the lock:

Access to the Settings and Configuration Menu.

Use the Set Control [11] to highlight the Lock/Unlock
icon.

Press the Set Control [11]. The Lock Menu is shown
on the display.
19
PF44 PF46
-
M
M
?
Figure 43
M
Figure 44
English