Lincoln Electric PF26 Operator's Manual page 21


Press the Set Control [11] to select the Display
Configuration. The Check Mark will also change the
position.
A
V
Figure 37

Confirm the select – press the Right Button [12].

Return to the main level of the interface. Instead of
the Welding Parameters Bar is visible the Weld
Score Bar.
5.51
m
min
ArCO2
1.2
Steel
22.5
21
Figure 38
Note: If the Set Control [11] is pressed, the Welding
Parameters Bar will be visible for 5 seconds.
English
%
28.6
v
125
A
V
95%
Assignment Function to the Right
Button
To the Right Button [12] can assign:
Icon Description
Disabled - OFF (factory
default)
Crater Procedure
Rub-in WFS
Wave Controls
Recall the Program
stored in the User
Memory
Note: To use the assigned functions:

Recall the Program stored in the User Memory

Crater Procedure

Run-in WFS
icons of these functions must be added to the Welding
Parameters Bar [27].
To assign the function to the Right Button [12]:

Access to the Settings and Configuration Menu.

Use the Set Control [11] to highlight the Assigned
Function to the Right Button icon.
M

Press the Set Control [11]. The Assigned Function
Menu is shown on the display.
OFF
18
PF44 PF46
-
?
Figure 39
Figure 40
English