Table of Contents
Advertisement
Troubleshooting
Setup Assistant CD does not automatically start.
If the CD-ROM does not start the Setup Assistant automatically, it could be that
the computer is running other applications that are interfering with the CD drive.
1. If the Setup Assistant Welcome screen does not appear within 15-20 seconds,
open up your CD-ROM drive by double-clicking on the "My Computer" icon
that is located on your desktop.
2. Next, double-click on the CD-ROM drive that the Setup Assistant CD has
been placed in to start the installation.
3. The Setup Assistant should start within a few seconds. If, instead, a window
appears showing the files on the CD, double-click on the icon labeled
"SetupAssistant".
4. If the Setup Assistant still does not start, reference the section titled "Manually
Configuring Network Settings" (page xx [confirm page no. ]) of this User
Manual for an alternative setup method).
Advertisement
Table of Contents
