Belkin F6D6230-4 v1 User Manual page 101

Setup Assistant cannot connect my Router to the Internet.
If the Setup Assistant is not able to connect the Router to the Internet, please
check the following items:
1. Use the troubleshooting suggestions within the Setup Assistant.
2. If your ISP requires a user name and password, make sure that you have
typed in your user name and password correctly. Some user names require
that the ISP's domain may be at the end of the name. Example:
"myname@myisp.com". The "@myisp.com" part of the user name may need
to be typed as well as your user name.
If you continue to have no Internet connection, reference the section titled
"Manually Configuring Network Settings" (page xx of this User Manual for an
alternative setup method).
 The Setup Assistant completed installation, but my web browser
doesn't work.
 I am unable to connect to the Internet. The "modem" LED on my Router
is off, and the "internet" LED is blinking.
If you cannot connect to the Internet, and the "modem" LED is off, and the
"internet" LED is blinking, the problem may be that your modem and Router are
not connected properly.
1. Make sure the network cable between the modem and the Router is
connected. The cable should be connected at one end to the Router's "to
Modem" port, and at the other end to the network port on your modem.