Advertisement
022552_23661_8820-
00396_F7D4401_v1_Play_Max_Modem_Router_02082010_update_0325-2010-ok
D) Reset Button
This button is used to restart your Router in rare cases when it
functions incorrectly. Resetting the Router will preserve your
settings. This button may also be used to restore the factory default
settings. Please see the Troubleshooting section for more
information.
E) Power Connector
Connect the included power supply to this jack.
Troubleshooting, Support, and Warranty
Troubleshooting
The Setup CD does not automatically start.
If Belkin Setup does not run when you insert the CDROM, your
computer may not be configured to open CDs automatically.
If Belkin Setup does not appear within 15 seconds, browse to your
CDROM drive and open the "Belkin Setup" icon. Alternatively, you
may visit http://router/ and perform the setup manually. Please
see "Manual Setup Using Your Browser" earlier in this manual for
more information.
Belkin Setup cannot find my Router.
If Belkin Setup is not able to communicate with your Router during
the installation process, please check the following items.
1) Make sure that the wireless hardware on your computer is turned
on, if available.
2) Try connecting your computer to one of the four "wired" ports on
the Router with an Ethernet cable.
3) Ensure that the Router is on. The frontpanel light should be on.
4) Unplug the Router's power supply for 10 seconds, then plug it back
in.
Advertisement
