Table of Contents
Advertisement
4. In the "Local Area Connection Properties" window, click "Internet Protocol
(TCP/IP)" and click the "Properties" button. The following screen will appear:
(1)
(2)
(3)
5. If "Use the following IP address" (2) is selected, your Router will need to be
set up for a static IP connection type. Write the address information the table
below. You will need to enter this information into the Router.
[win2k settings chart.tif] [use current image] [keep]
6. If not already selected, select "Obtain an IP address automatically" (1) and
"Obtain DNS server address automatically" (3). Click "OK".
Your network settings are now configured for use with the Router.
[XP TCPIP.tif] [use current image] [keep]
Advertisement
Table of Contents
