Manually Set Up Your Internet Connection - Belkin F9K1112 v1 User Manual

established, the light will turn blue and then go out. If a
connection is not established, the light will blink amber. You
may repeat the process to try again.
You can repeat this process for each WPS‐enabled device you'd
like to add to your network.
Manually Set Up Your Internet
Connection
Use a browser to visit
The router homepage should appear.
[Image of browser showing the router homepage – see "Tested
QIG 2011 07 14.pdf" provided for guideline]
You can also try visiting
The status of your Internet connection is shown in the
upper right corner of the router homepage. If after a few
moments it says "Connected," you're done! You can surf
the Internet.
[Image of browser showing "connected" homepage
14.pdf" provided for guideline]
If not, select "Connection Type" from the menu on the left.
[Zoomed in image of the "Connection Type" option in the
homepage – see "Tested QIG 2011 07 14.pdf" provided for
guideline]
http://router/
http://192.168.2.1/
– see "Tested QIG 2011 07