Belkin F9K1112 v1 User Manual page 5

[SCREENSHOT OF SETUP MENU setup menu.png]
1) Click the Setup icon on the CD menu.
Diagram of bottom of the router showing service
[
card – can be obtained from "Tested QIG 2011 07
14.pdf" provided
2) After a brief installation, the setup software will ask you for
the network name and password from the network
information card that is stored in the foot of your new Belkin
Router. Store the card under the base of your Router for
future reference.
[SCREENSHOT OF SUCCESS setup success.png]
3) A progress screen will appear while additional software is
installed. This may take a few minutes to complete. Once
finished, a "Success" message will appear indicating that you
are connected to the Internet via your new Belkin Router.
During setup you may be asked for additional information.
You may need to enter a username and password provided by your ISP.
This username and password is likely to be found on materials that came
from your ISP when you signed up for service. If necessary, you may need
to contact your ISP to retrieve your username and password.
If you have a static IP address, you may need to enter additional
information also provided by your ISP.
If your computer doesn't have a wireless adapter, or the setup software is
unable to control it, you may be asked to connect your computer to the
Router with a network cable.
]