Belkin F9K1112 v1 User Manual page 8

[Diagram of bottom of the router showing service card – can be
obtained from "Tested QIG 2011 07 14.pdf" provided]
Can't find the card? The default network name and password are also printed on the foot of
the Router.
Use your computer, tablet, or smartphone to connect to the
wireless network shown on the network ID card.
[Diagram of connecting to SSID screenshot – needs creating, take
direction from "Tested QIG 2011 07 14.pdf" provided]
When requested, please enter the password (security key) provided
on the card.
Take a moment to look at the light on the front of the Router. If it
is solid blue, your Router was able to connect to the Internet
automatically.
[Image of front of the router with blue LED (needs creating)]
If not, please proceed to "Manually Set Up Your Internet
Connection" on page XX.
Using the WPS Button
1) Start WPS Push Button Connection (WPS PBC) on your
computer or other Wi‐Fi device that you would like to
connect wirelessly to your Router. Often there will be a
button for this purpose in software that came with the device,
or a physical "WPS," "PBC," or "Security" button on the device
itself.
2) Within two minutes, press the WPS button on your Router
and hold for two seconds.
The WPS light (small light above WPS button) will blink blue
while it listens for your Wi‐Fi device. Once a connection is